{"product_id":"sgs-31364-square-end-mill-1-4-in-2-flute-solid-carbide-altin","title":"Sgs 31364 Square End Mill 1\/4 in 2 Flute Solid Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 31364 is a 2-flute solid carbide square end mill designed for precision milling in a wide range of materials. It features a 1\/4 inch cutting diameter, 1\/2 inch length of cut, and a 2 inch overall length with a straight cylindrical 1\/4 inch shank. The micrograin carbide substrate provides rigidity and wear resistance, while the AlTiN coating extends tool life in demanding cutting conditions. The 30-degree right-hand spiral flute geometry promotes efficient chip evacuation and smooth cutting action. This is a single-end, stub-length tool suited for high-precision work in tight setups.\u003c\/p\u003e\u003cp\u003eThe SGS 31364 is a stub-length end mill appropriate for machining ferrous and non-ferrous metals, high-temp alloys, and cast materials. Its material code ratings cover cast iron, non-ferrous metals, stainless steel, steel, and superalloys. The center-cutting design allows plunge entry. It is well suited for finishing and semi-finishing passes in mold, die, and general precision machining operations where a short, rigid tool profile is required to minimize deflection.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating for extended tool life and thermal resistance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate provides high rigidity and edge retention\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand helix promotes efficient chip evacuation and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eStub-length profile minimizes deflection in precision milling applications\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank with tight shank diameter tolerance for secure tool holding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with materials coded H, K, M, N, P, and S, covering cast iron, non-ferrous metals, stainless steel, carbon and alloy steels, and high-temperature superalloys. Fits standard 1\/4 inch collets, end mill holders, and shrink-fit tooling systems.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the spindle fully stopped and machine power locked out per shop safety procedures. Ensure the tool holder collet or chuck is clean and free of debris before seating the shank. Verify runout at setup and apply appropriate cutting parameters for the workpiece material and machine rigidity. Do not exceed the tool manufacturer's recommended speeds and feeds for the coating and substrate grade.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 \/ -0.00035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 17\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 31364\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51727987081522,"sku":"31364","price":45.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d11d90f3c172748045921563ab546425.jpg?v=1788685537","url":"https:\/\/voomisupply.com\/products\/sgs-31364-square-end-mill-1-4-in-2-flute-solid-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}