{"product_id":"sgs-31228-ball-end-mill-0-1875-in-4-flute-solid-carbide","title":"Sgs 31228 Ball End Mill 0.1875 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 31228 is a solid carbide ball end mill designed for high-performance milling in demanding metalworking applications. It features a 0.1875 inch (3\/16 inch) mill diameter with a 0.375 inch length of cut and a 2 inch overall length. The four-flute, double-end configuration with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. An AlTiN coating improves heat resistance and tool life at elevated cutting speeds. Built from micrograin carbide, this stub-length end mill delivers the rigidity and edge retention required for precision work in a wide range of materials. It is installed by machinists and tool-and-die professionals on CNC mills and manual milling machines.\u003c\/p\u003e\u003cp\u003eThe SGS 31228 is suited for milling ferrous and non-ferrous metals, heat-resistant superalloys, cast iron, and stainless steels, corresponding to material codes H, K, M, N, P, and S. The double-end design allows both ends to be used, extending the tool service life. The stub length construction minimizes deflection in tight-clearance or shallow-pocket operations. This end mill is a practical choice for contouring, profiling, and slotting tasks where a ball nose profile is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.1875 inch mill diameter with 0.375 inch length of cut for precision milling operations\u003c\/li\u003e\n\u003cli\u003e4-flute, double-end design extends usable tool life\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides heat resistance and improved wear performance at high cutting speeds\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow and smooth surface finish\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction delivers edge retention and rigidity\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute geometry for standard CNC and manual mill setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 3\/16 inch collets or end mill holders on CNC machining centers and manual knee mills. Compatible with workpiece materials coded H, K, M, N, P, and S, covering hardened steels, cast iron, stainless steels, non-ferrous metals, and superalloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists. Secure the shank in a properly sized collet or end mill holder and verify runout before cutting. Confirm that the tool holder is rated for the intended spindle speed and feed parameters. Inspect both cutting ends for chipping or wear before each use, and do not exceed the cutting parameters recommended for the workpiece material and coating type.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1875 inches (3\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 14B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 31228\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51730077745458,"sku":"31228","price":70.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6362aafc2340c6ef156b6b9d697dcf3c.jpg?v=1788711356","url":"https:\/\/voomisupply.com\/products\/sgs-31228-ball-end-mill-0-1875-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}