{"product_id":"sgs-30849-square-end-mill-1-8-in-3-flute-solid-carbide","title":"Sgs 30849 Square End Mill 1\/8 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 30849 is a solid carbide square end mill designed for precision milling in demanding metalworking applications. It features a 1\/8 inch (0.1250 inch) diameter with a 3\/8 inch (0.3750 inch) length of cut and a 1-1\/2 inch overall length. The three-flute, right-hand spiral design with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. An AlTiN coating adds heat and wear resistance, extending tool life in high-temperature cutting conditions. This is a single-end, straight cylindrical shank tool built from micrograin carbide for edge retention and dimensional consistency. Machinists and tool-and-die professionals use this end mill for slotting, profiling, and light pocketing operations.\u003c\/p\u003e\u003cp\u003eThe SGS 30849 is suited for milling a broad range of workpiece materials including hardened steels, cast irons, stainless steels, non-ferrous metals, aluminum alloys, and high-temperature superalloys — corresponding to material codes H, K, M, N, P, and S. Its regular-length classification and 1\/8 inch shank diameter make it compatible with standard collet systems used in CNC machining centers and manual mills. The Series 5 designation places it within a consistent family of SGS carbide end mills for tool crib standardization.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for superior hardness and edge retention\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for extended tool life in high-heat and abrasive cutting conditions\u003c\/li\u003e\n\u003cli\u003e3-flute, right-hand spiral design with 30-degree helix for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank with tight shank diameter tolerance (-0.0001 \/ -0.0004 inches) for secure collet grip\u003c\/li\u003e\n\u003cli\u003eSingle-end configuration; regular length for general-purpose milling setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with workpiece materials coded H, K, M, N, P, and S — covering hardened steels, cast irons, stainless steels, non-ferrous metals, aluminum alloys, and high-temperature superalloys. Fits standard 1\/8 inch collet systems on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with CNC or manual milling equipment. Power down and lock out the spindle before inserting or removing the tool. Seat the shank fully into a clean, undamaged collet to the recommended gauge line before torquing the collet nut. Inspect the cutting edges and coating for chips or damage before each use; do not run a damaged carbide end mill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.3750 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5000 inches (1-1\/2 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30849\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51732016333106,"sku":"30849","price":33.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d1683988024beec23690dd02589b3afd.jpg?v=1788738145","url":"https:\/\/voomisupply.com\/products\/sgs-30849-square-end-mill-1-8-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}