{"product_id":"sgs-30828-square-end-mill-9-32-in-3-flute-solid-carbide","title":"Sgs 30828 Square End Mill 9\/32 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30828 is a solid carbide square end mill designed for precision milling operations across a broad range of workpiece materials. Built to Series 5 standards with a micrograin carbide substrate and AlTiN finish, this tool delivers hardness and thermal resistance suited to demanding cutting environments. It features a 9\/32 inch (0.2813 inch) mill diameter, a 3\/4 inch length of cut, and a 5\/16 inch straight-cylindrical shank. The three-flute spiral geometry with a 30-degree helix angle balances chip evacuation with surface finish quality. At 2-1\/2 inches overall length, it fits standard milling chucks and collet holders used in vertical and horizontal machining centers.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited to shops and field machinists working with a wide range of materials. The primary workpiece material codes cover hardened steels, cast iron, stainless steel, non-ferrous alloys, general steels, and heat-resistant superalloys. Centercutting capability allows direct plunge entry without a pre-drilled pilot hole. Right-hand cut and right-hand flute configuration matches standard spindle rotation on CNC mills and manual knee mills alike. Regular length classification makes it a go-to choice for general-purpose slot milling, profiling, and pocket work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides thermal and oxidation resistance at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003eThree spiral flutes with 30-degree helix angle for efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.0001 \/ -0.002 inch for consistent fit and finish\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a regular-length square end mill compatible with standard 5\/16 inch collets and end mill holders on CNC machining centers and manual milling machines. Rated for use on hardened steels, cast iron, stainless steel, non-ferrous materials, general steels, and high-temperature superalloys per primary workpiece material codes H, K, M, N, P, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following established shop safety procedures. Power down and lock out the spindle before inserting or removing the end mill from the holder. Ensure the shank is fully seated and the collet nut is torqued to the tool holder manufacturer specification. Verify runout with a dial indicator before engaging the cut to avoid premature edge wear or tool breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 9\/32 inch (0.2813 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.002 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30828\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51749440291122,"sku":"30828","price":68.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ec2892229fd31c89c6c8b694c0867492.jpg?v=1788906137","url":"https:\/\/voomisupply.com\/products\/sgs-30828-square-end-mill-9-32-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}