{"product_id":"sgs-30815-square-end-mill-5-64-in-3-flute-solid-carbide","title":"Sgs 30815 Square End Mill 5\/64 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30815 is a solid carbide square end mill designed for precision milling in a wide range of materials. It features a 5\/64 inch (0.0781 inch) cutting diameter, a 3\/16 inch length of cut, and a 1\/8 inch straight-cylindrical shank, with a 1-1\/2 inch overall length. The three-flute spiral geometry runs right-hand cut with right-hand flute direction and a 30-degree helix angle. An AlTiN coating adds heat and wear resistance, making this tool well-suited for harder workpieces and higher-speed applications. The micrograin carbide substrate provides edge integrity at small diameters. Machinists and tool-and-die professionals use this end mill for slot milling, profiling, and finishing passes in tight-tolerance work.\u003c\/p\u003e\n\u003cp\u003eThis end mill is built for use in CNC machining centers and manual mills where small-diameter precision cutting is required. The centercutting design allows plunge entry as well as conventional side milling. Compatible workpiece material codes include H, K, M, N, P, and S, covering hardened steels, cast irons, stainless steels, non-ferrous metals, general steels, and superalloys. The regular-length body keeps deflection low at this diameter, which is critical for maintaining dimensional accuracy in fine detail work on molds, dies, and small components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention at 0.0781 inch diameter\u003c\/li\u003e\n  \u003cli\u003eAlTiN finish for elevated heat resistance and extended tool life in demanding cuts\u003c\/li\u003e\n  \u003cli\u003eThree-flute spiral geometry with 30-degree helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting capability allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.0001 \/ -0.002 inches for consistent fitment and accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and manual milling machines accepting a 1\/8 inch straight-cylindrical shank. Rated for workpiece material codes H, K, M, N, P, and S as specified by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist familiar with small-diameter carbide tooling. Seat the shank fully in a collet or end mill holder rated for 1\/8 inch shanks and torque the retention mechanism per the toolholder manufacturer's specification. Carbide end mills at this diameter are brittle — avoid side loads during tool changes and inspect the cutting edge under magnification before use. Always verify spindle speed and feed rate against material and diameter guidelines before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/64 inch (0.0781 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-1\/2 inches (1.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30815\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51746179449138,"sku":"30815","price":36.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b1afe3adf4a46c4faba4ec0348605fba.jpg?v=1788866811","url":"https:\/\/voomisupply.com\/products\/sgs-30815-square-end-mill-5-64-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}