{"product_id":"sgs-30814-square-end-mill-1-16-in-3-flute-solid-carbide","title":"Sgs 30814 Square End Mill 1\/16 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 30814 is a solid carbide square end mill designed for high-precision milling in demanding machining applications. Built on the SGS Series 5 platform, it features a 1\/16 inch cutting diameter, a 3\/16 inch length of cut, and a 1\/8 inch straight cylindrical shank. The three-flute geometry paired with a 30-degree helix angle and AlTiN finish supports efficient chip evacuation and heat resistance during aggressive cuts. At 1-1\/2 inches overall length and micrograin carbide construction, this tool holds tight tolerances and handles a broad range of workpiece materials. It is centercutting, right-hand cut, and right-hand flute, making it suitable for standard CNC milling centers and manual knee mills.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for precision slot milling, profiling, and contouring operations across multiple material categories. The Primary Workpiece Material codes cover ferrous alloys, cast iron, stainless steel, non-ferrous materials, steel, and superalloys. The small diameter and regular length classification make it especially well-suited for fine-feature work in mold and die, aerospace component machining, and medical device manufacturing where tight tolerances and repeatable performance are critical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance in demanding cuts\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides elevated heat resistance and extended tool life at higher surface speeds\u003c\/li\u003e\n\u003cli\u003eThree-flute spiral design with 30-degree helix angle promotes smooth chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration for standard CNC and manual milling setups\u003c\/li\u003e\n\u003cli\u003eTight tolerance shank: -0.0001 to -0.0004 inches for secure, low-runout toolholder engagement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with workpiece material categories H, K, M, N, P, and S, covering hardened steels, cast iron, stainless steel, non-ferrous alloys, carbon and alloy steels, and heat-resistant superalloys. Fits standard 1\/8 inch collets and end mill holders used on CNC machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC programmer familiar with small-diameter tooling. Ensure the toolholder collet or end mill holder is clean and free of chips before seating the shank. Confirm runout at the cutting diameter before beginning a production run, as small-diameter carbide tools are sensitive to even minor misalignment. Handle micrograin carbide end mills with care to avoid chipping the cutting edges during setup and storage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5000 inches (1-1\/2 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30814\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51744453394738,"sku":"30814","price":36.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/59c279af619d1f8596dbf181a3ce9278.jpg?v=1788856744","url":"https:\/\/voomisupply.com\/products\/sgs-30814-square-end-mill-1-16-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}