{"product_id":"sgs-30544-ball-end-mill-0-3438-in-3-flute-solid-carbide","title":"Sgs 30544 Ball End Mill 0.3438 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30544 is a solid carbide ball end mill designed for precision milling operations across a wide range of workpiece materials. With a 0.3438-inch (11\/32 inch) mill diameter, 1-inch length of cut, and a 30-degree helix angle, this three-flute tool delivers efficient chip evacuation and smooth cutting action in both roughing and finishing passes. Manufactured from micrograin solid carbide, it offers the hardness and wear resistance required for demanding machining environments. The uncoated single-end design suits applications where post-sharpening reconditioning is a common part of the tool management workflow.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for use on CNC machining centers and manual mills in job shop, production, and toolroom settings. The Series 5B geometry is engineered for compatibility with a broad spectrum of materials, including steel, cast iron, stainless steel, aluminum and non-ferrous metals, high-temperature alloys, and titanium, as indicated by the primary workpiece material codes H, K, M, N, P, and S. The 3\/8-inch shank diameter fits standard ER and side-lock toolholders commonly found in vertical and horizontal machining center setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for hardness and edge retention\u003c\/li\u003e\n  \u003cli\u003eThree-flute design balances chip clearance with cutting edge strength\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand spiral helix for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eBall end profile enables contour milling, 3D profiling, and radius floor work\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.000 to -0.002 inches for consistent fit and finish\u003c\/li\u003e\n  \u003cli\u003eShank diameter tolerance of +0.00000 to -0.00035 inches for secure toolholder engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with workpiece materials classified under SGS material codes H, K, M, N, P, and S, covering steel, cast iron, stainless steel, non-ferrous metals, high-temperature alloys, and titanium. Fits standard 3\/8-inch bore toolholders.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer or spindle is locked out before changing tooling. Confirm the shank is fully seated in the toolholder to the minimum insertion depth before torquing the retention mechanism. Follow the machine tool manufacturer and toolholder manufacturer specifications for clamping force — do not rely on feel alone when setting collet nuts or set screws.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.3438 inches (11\/32 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00035 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 5B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30544\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51752451440946,"sku":"30544","price":81.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b0f7a0f342bf1be676227c1f4dbc23ba_9359cf6a-acef-4553-9bea-7b18fc422ea8.jpg?v=1788928213","url":"https:\/\/voomisupply.com\/products\/sgs-30544-ball-end-mill-0-3438-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}