{"product_id":"sgs-30450-square-end-mill-5-16-in-2-flute-solid-carbide","title":"Sgs 30450 Square End Mill 5\/16 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 30450 is a solid carbide square end mill designed for precision milling in a wide range of metal and composite workpiece materials. Built on the SGS Series 3 platform, it features a 5\/16 inch cutting diameter, a 13\/16 inch length of cut, and a 2-1\/2 inch overall length. The AlTiN finish provides thermal resistance and extended tool life under high-speed cutting conditions. The 2-flute geometry promotes chip evacuation in materials where flute loading is a concern. Machined from micrograin carbide, the 30450 delivers consistent edge geometry and dimensional accuracy suitable for finish and semi-finish milling operations.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling operations on ferrous metals, cast iron, stainless steel, aluminum, non-ferrous alloys, and high-temperature alloys, corresponding to primary workpiece material codes H, K, M, N, P, and S. The straight cylindrical shank and regular length profile make it compatible with standard collet chucks and end mill holders used in CNC machining centers and manual knee mills. Centercutting capability allows direct plunge entry without a pre-drilled pilot hole, adding flexibility in slotting and pocketing operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides oxidation resistance and reduced friction at elevated cutting temperatures\u003c\/li\u003e\n\u003cli\u003e2-flute spiral design promotes chip clearance in slotting and pocketing\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without pilot drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration for standard spindle setups\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle balances cutting forces across a broad material range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe SGS 30450 is rated for use in workpiece materials classified under codes H, K, M, N, P, and S, covering tool steels, cast irons, stainless steels, aluminum alloys, non-ferrous materials, and high-temperature alloys. No additional specific compatible machine models or replacement part numbers were provided in the product data.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator with the machine spindle fully stopped and locked out before tool changes. Seat the straight cylindrical shank fully into the collet or end mill holder and torque the retention mechanism to the toolholder specification before starting the spindle. Inspect the cutting edges for chips or damage before each use, and verify runout with a dial indicator when tolerances are critical. Discard the tool if edge chipping or measurable wear is detected rather than attempting regrinding without proper equipment.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 13\/16 inch (0.8125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch (0.3125 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30450\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51737498943794,"sku":"30450","price":70.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cdbebc092b23e9ae764e35150429f8f6.jpg?v=1788789316","url":"https:\/\/voomisupply.com\/products\/sgs-30450-square-end-mill-5-16-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}