{"product_id":"sgs-30442-square-end-mill-3-16-in-2-flute-solid-carbide","title":"Sgs 30442 Square End Mill 3\/16 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 30442 is a solid carbide square end mill designed for precision milling in a wide range of materials. It features a 3\/16 inch cutting diameter with a 5\/8 inch length of cut and a 2 inch overall length. The two-flute, spiral geometry with a 30-degree helix angle promotes efficient chip evacuation. An AlTiN coating provides heat resistance and extended tool life in demanding cutting conditions. Built from micrograin carbide, this end mill delivers the rigidity and edge retention required for consistent performance in production environments. It is installed and operated by machinists and toolroom professionals.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for slot milling, profiling, and contouring operations across a broad range of workpiece materials. The primary workpiece material codes include H, K, M, N, P, and S, covering hardened materials, cast iron, stainless steel, non-ferrous alloys, steel, and high-temperature alloys. Its centercutting design allows plunge entry, making it versatile for both roughing and finishing passes. The straight cylindrical shank fits standard collet chucks and end mill holders common in vertical machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and long edge life\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for thermal resistance in high-speed and dry cutting applications\u003c\/li\u003e\n\u003cli\u003eCentercutting design permits direct plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle with spiral flutes for effective chip evacuation\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of +0.000 \/ -0.002 inches for precise fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with workpiece material codes H, K, M, N, P, and S as specified by the manufacturer. Fits standard collet chucks and end mill holders accepting a 3\/16 inch straight cylindrical shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the shank fully within the collet or end mill holder to the recommended engagement depth to prevent pullout. Verify runout with a dial indicator before beginning the cut, as excessive runout accelerates tool wear and reduces surface finish quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.625 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30442\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51744541376818,"sku":"30442","price":44.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/52add394e48e9d0a297a5000d2116c02.jpg?v=1788857804","url":"https:\/\/voomisupply.com\/products\/sgs-30442-square-end-mill-3-16-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}