{"product_id":"sgs-30438-square-end-mill-0-125-in-2-flute-solid-carbide","title":"Sgs 30438 Square End Mill 0.125 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30438 is a solid carbide square end mill designed for precise milling operations in a wide range of metalworking and machining applications. With a 0.125-inch cutting diameter, 0.5-inch length of cut, and 1.5-inch overall length, this compact tool is built for close-tolerance slotting, profiling, and peripheral milling. The micrograin carbide construction and AlTiN coating provide heat resistance and wear life under demanding cutting conditions. A 30-degree helix angle promotes efficient chip evacuation, while the two-flute geometry balances chip clearance and cutting edge strength.\u003c\/p\u003e\n\u003cp\u003eThe SGS 30438 is suited for machining a broad range of workpiece materials, including steels, stainless steels, cast irons, non-ferrous metals, high-temperature alloys, and titanium alloys, as indicated by material codes H, K, M, N, P, and S. Its 0.125-inch straight cylindrical shank fits standard collet chucks and end mill holders found in CNC machining centers and manual mills. The regular-length profile makes it a practical choice for general-purpose milling where extended reach is not required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and extended tool life\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating improves heat resistance and reduces built-up edge in difficult materials\u003c\/li\u003e\n  \u003cli\u003e2-flute spiral design provides chip clearance in slotting and profiling cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows plunge milling without a pre-drilled entry hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute configuration for standard spindle direction\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle supports balanced cutting forces and smooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 0.125-inch collet chucks and end mill holders on CNC machining centers, knee mills, and similar machine tools. Compatible with workpiece materials designated H, K, M, N, P, and S per the supplier material code classification, covering steels, stainless steels, cast irons, non-ferrous alloys, high-temperature alloys, and titanium alloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by a qualified machinist or CNC operator. Secure the shank fully within the collet or tool holder to the recommended engagement depth before tightening. Verify spindle speed, feed rate, and depth of cut against published speeds and feeds for the specific workpiece material before beginning the cut. Inspect the cutting edges for wear or chipping before each use and replace the tool if damage is present.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30438\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51747426992434,"sku":"30438","price":33.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/49e08fead35ba195802690f031792cc7.jpg?v=1788879970","url":"https:\/\/voomisupply.com\/products\/sgs-30438-square-end-mill-0-125-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}