{"product_id":"sgs-30377-square-end-mill-1-8-in-2-flute-solid-carbide","title":"Sgs 30377 Square End Mill 1\/8 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30377 is a solid carbide square end mill designed for precise milling operations in a wide range of metalworking and machining applications. With a 1\/8 inch cutting diameter and a 3\/8 inch length of cut, this single-end tool delivers tight tolerances on small-feature work. The two-flute, right-hand spiral geometry with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. Manufactured from micrograin solid carbide, the 30377 offers the rigidity and wear resistance required for demanding cuts. The bright, uncoated finish makes it well suited for non-ferrous metals, plastics, and cast materials where coating adhesion is not a factor.\u003c\/p\u003e\n\u003cp\u003eThis end mill is appropriate for use on CNC machining centers, manual mills, and high-speed spindle applications where small-diameter tooling is required. The 1\/8 inch straight-cylindrical shank fits standard collets and tool holders sized for 1\/8 inch tooling. The 1.5 inch overall length keeps the tool compact for setups with limited Z-axis clearance. It is centercutting, allowing plunge entry into workpieces. Typical workpiece material codes for this tool include cast iron, non-ferrous metals, steel, stainless steel, superalloys, and similar materials. It is intended for use by machinists and tooling specialists in production and job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for high rigidity and extended tool life\u003c\/li\u003e\n  \u003cli\u003e1\/8 inch cutting diameter with a mill diameter tolerance of plus 0.000 \/ minus 0.002 inches\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch length of cut supports small-feature profiling and slotting\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with right-hand flute and right-hand cut direction for efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for non-ferrous metals, plastics, and non-abrasive materials\u003c\/li\u003e\n  \u003cli\u003eRegular length, single-end configuration for standard setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 1\/8 inch collets and tool holders on CNC machining centers and manual milling machines. Compatible workpiece material codes include H, K, M, N, P, and S, covering cast iron, non-ferrous metals, steel, stainless steel, and superalloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before inserting the shank. Torque the collet nut to the tool holder manufacturer specifications and verify runout with a dial indicator before beginning a cut. Consult the tool manufacturer speed and feed recommendations for the specific workpiece material to avoid premature tool wear or breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/8 inch (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (0.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: plus 0.000 \/ minus 0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: plus 0.00000 \/ minus 0.00032 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30377\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51739710325042,"sku":"30377","price":30.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4ff8cb24022ee25b51332240fc8842e6.jpg?v=1788818090","url":"https:\/\/voomisupply.com\/products\/sgs-30377-square-end-mill-1-8-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}