{"product_id":"sgs-30041-ball-end-mill-0-1719-in-4-flute-solid-carbide","title":"Sgs 30041 Ball End Mill 0.1719 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 30041 is a solid carbide ball end mill designed for precision milling operations across a wide range of materials. It features a 0.1719-inch (11\/64-inch) mill diameter and a 0.625-inch length of cut, making it suited for finishing and contouring work in tight geometries. The 4-flute configuration and 30-degree helix angle promote efficient chip evacuation and smooth surface finishes. An AlTiN coating provides heat and wear resistance at elevated cutting temperatures, extending tool life in demanding applications. The micrograin carbide substrate adds rigidity and edge retention. Licensed machinists and CNC operators install this tool in machining centers and CNC mills.\u003c\/p\u003e\n\u003cp\u003eThe SGS 30041 is intended for use in general-purpose and high-performance milling operations on materials including cast iron, non-ferrous metals, stainless steel, titanium alloys, carbon steel, and heat-resistant superalloys, corresponding to material codes H, K, M, N, P, and S. The single-end, regular-length design suits standard vertical and horizontal machining center spindles. It is commonly used for 3D contouring, profiling, and detail work where a ball nose geometry is required. The variable index geometry helps reduce harmonics and chatter during cutting.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for elevated-temperature wear resistance\u003c\/li\u003e\n  \u003cli\u003e4-flute, 30-degree helix for smooth chip flow and surface finish\u003c\/li\u003e\n  \u003cli\u003eVariable index geometry to minimize chatter and vibration\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand spiral flute direction\u003c\/li\u003e\n  \u003cli\u003eSingle-end ball nose profile for 3D contouring and profiling work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style solid carbide ball end mill for use in CNC machining centers and mills accepting a 3\/16-inch shank diameter collet or tool holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC operator. Power down and lock out the spindle before inserting or removing the tool. Seat the shank fully and evenly in a precision collet or end mill holder to the manufacturer-recommended engagement depth. Inspect the cutting edges for chips or damage before each use and verify runout with a dial indicator after tool change.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1719 inches (11\/64 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00032 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30041\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51750510068018,"sku":"30041","price":55.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0b2093378dd17da993c91eaae75f59b_3468a71f-804f-497e-b7af-68fc8f20a5dd.jpg?v=1788916004","url":"https:\/\/voomisupply.com\/products\/sgs-30041-ball-end-mill-0-1719-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}