{"product_id":"sgs-30036-ball-end-mill-0-0938-in-4-flute-solid-carbide-altin","title":"Sgs 30036 Ball End Mill 0.0938 in 4 Flute Solid Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 30036 is a single-end ball end mill engineered for precision milling in demanding applications. Built from micrograin solid carbide and coated with AlTiN, it delivers hardness and heat resistance at the cutting edge. The 0.0938-inch diameter and 0.2813-inch length of cut make it well-suited for tight-tolerance profiling, contouring, and finishing passes. Four spiral flutes with a 30-degree helix angle and variable index geometry promote chip evacuation and reduce chatter. Right-hand cutting and right-hand flute direction are standard. This tool is installed and operated by machinists and CNC programmers working in production or job-shop environments.\u003c\/p\u003e\u003cp\u003eThe SGS 30036 is designed for milling workpiece materials across a wide range of material groups, including hardened steels, cast irons, stainless steels, non-ferrous alloys, steel alloys, and high-temperature alloys (Primary Workpiece Material Codes H, K, M, N, P, and S). Its regular-length profile and 1\/8-inch shank make it compatible with standard collet chucks and shrink-fit holders commonly used in vertical and horizontal machining centers. It is a practical choice for slot milling, profiling, and 3D contouring at small diameters where rigidity and tool-life consistency matter.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide substrate for improved wear resistance and edge retention\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides thermal protection and hardness in dry or semi-dry cutting conditions\u003c\/li\u003e\n\u003cli\u003e4-flute spiral geometry with variable index to reduce harmonic vibration and chatter\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes smooth chip flow and consistent surface finish\u003c\/li\u003e\n\u003cli\u003e0.0938-inch diameter with mill diameter tolerance of +0.000 to -0.002 inches for tight-tolerance work\u003c\/li\u003e\n\u003cli\u003eSingle-end design; no coolant-through feature, suited for external coolant or dry cutting setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard 1\/8-inch collet chucks and tool holders on CNC machining centers. Compatible with workpiece material groups H, K, M, N, P, and S as designated in the SGS Series 1B product line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator following the machine tool manufacturer's tooling guidelines. Ensure the spindle is fully stopped and locked out before inserting or removing the tool from the holder. Verify collet size matches the 1\/8-inch shank before tightening; use a calibrated torque wrench and the holder manufacturer's specified procedure. Check runout after seating the tool to confirm it meets the tolerance requirements of the application.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0938 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.2813 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.00000 to -0.00032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30036\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51728433250610,"sku":"30036","price":41.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f0b2093378dd17da993c91eaae75f59b_ac8716d3-4e64-4185-8dc7-6ef4f0edbe7a.jpg?v=1788691086","url":"https:\/\/voomisupply.com\/products\/sgs-30036-ball-end-mill-0-0938-in-4-flute-solid-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}