{"product_id":"sgs-07371-circuit-board-drill-bit-2-4-mm-solid-carbide","title":"Sgs 07371 Circuit Board Drill Bit 2.4 Mm Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 07371 is a solid carbide circuit board drill bit designed for precision drilling in printed circuit board fabrication and related small-hole applications. It measures 2.4 mm (0.0945 inches) in diameter with a 1\/8-inch shank (3.18 mm) and an overall length of 1.5 inches (38.10 mm). The 130-degree four-facet point geometry delivers accurate entry and reduced thrust, while the uncoated solid carbide construction maintains edge sharpness through demanding production cycles. The regular spiral flute with a 30-degree helix angle promotes consistent chip evacuation. This bit is suited for technicians and machinists working in electronics manufacturing, precision fabrication shops, and prototype assembly environments.\u003c\/p\u003e\u003cp\u003eThis drill bit is rated for use on a broad range of workpiece materials including aluminum, cast iron, cobalt alloy, copper alloy, fiber-reinforced polymers, nickel, plastics, stainless steel, and titanium. The heavy-duty grade construction makes it appropriate for both low-volume prototype work and higher-throughput production drilling where consistent hole diameter tolerance is required. The short flute length of 0.40 inches (10.16 mm) provides rigidity in small-diameter drilling operations where deflection and runout must be minimized.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for wear resistance and dimensional stability across hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e130-degree four-facet point geometry reduces thrust and improves entry accuracy\u003c\/li\u003e\n\u003cli\u003e1\/8-inch (3.18 mm) shank diameter compatible with standard collet chucks and PCB drilling spindles\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute with 30-degree helix angle supports chip evacuation in deep or stacked-board drilling\u003c\/li\u003e\n\u003cli\u003eUncoated finish maintains consistent cutting geometry without coating buildup risk in fine-tolerance holes\u003c\/li\u003e\n\u003cli\u003eTapered web configuration adds core strength while preserving cutting efficiency at small diameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in PCB drilling machines, CNC drill presses, and precision machining centers accepting a 1\/8-inch shank. Compatible with workpiece materials including aluminum, cast iron, cobalt alloy, copper alloy, fiber-reinforced polymers, nickel, plastics, stainless steel, and titanium per SGS Series 105 material application ratings.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by qualified machinists or electronics fabrication technicians familiar with CNC drilling equipment and small-diameter tooling. Ensure the spindle and collet are clean and free of debris before seating the shank to prevent runout. Verify spindle speed and feed rate settings are appropriate for the workpiece material and bit diameter before starting the cut. Inspect the cutting edges for chipping or wear before each production run, as solid carbide bits can fracture if run in worn or misaligned setups.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.4 mm (0.0945 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Four Facet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/8 inch (3.18 mm \/ 0.1250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.40 inches (10.16 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (38.10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0003 to +0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Aluminum, Cast Iron, Cobalt Alloy, Copper Alloy, Fiber-Reinforced Polymers, Nickel, Plastics, Stainless Steel, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 07371\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51728240181554,"sku":"07371","price":15.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fa007b0765c36f69e36486c9a34a5a4a.jpg?v=1788690015","url":"https:\/\/voomisupply.com\/products\/sgs-07371-circuit-board-drill-bit-2-4-mm-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}