{"product_id":"sgs-07279-circuit-board-drill-bit-no-79-solid-carbide","title":"Sgs 07279 Circuit Board Drill Bit No. 79 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SGS 07279 is a solid carbide circuit board drill bit designed for precision drilling in printed circuit board fabrication and electronic assembly applications. Built to wire gauge size No. 79, it cuts at a decimal diameter of 0.0145 inches (0.37 mm) with a 130-degree four-facet point that centers accurately and reduces thrust on thin, layered materials. The 1\/8-inch shank diameter (0.1250 inches) fits standard collets and drill chucks used in benchtop CNC drilling equipment. The uncoated solid carbide construction provides rigidity and edge retention when working with abrasive or composite substrates. Licensed machinists, electronics manufacturing technicians, and precision fabricators are the primary installers of this tooling.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for small-diameter through-hole drilling in circuit board panels, multilayer PCB stacks, and precision machined components requiring tight positional tolerance. The 130-degree four-facet point geometry performs well across a broad range of workpiece materials including aluminum, copper alloy, stainless steel, titanium, cobalt alloy, nickel, cast iron, plastics, and fiber-reinforced polymers. The regular spiral with a 30-degree helix angle provides consistent chip evacuation during high-speed drilling passes in both single-piece and production-volume setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWire size No. 79 with 0.0145-inch (0.37 mm) cutting diameter for micro-hole applications\u003c\/li\u003e\n  \u003cli\u003e130-degree four-facet point geometry reduces walking and improves entry accuracy on flat and layered materials\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers rigidity and edge retention in abrasive workpiece materials\u003c\/li\u003e\n  \u003cli\u003eUncoated finish maintains consistent dimensional tolerance of -0.0003 to +0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e1\/8-inch shank diameter fits standard collets on CNC and benchtop PCB drilling machines\u003c\/li\u003e\n  \u003cli\u003eRegular spiral with 30-degree helix angle supports reliable chip evacuation in two-flute configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/8-inch collet CNC drilling equipment and benchtop drill presses used in circuit board and precision machining applications. Compatible workpiece materials include aluminum, cast iron, cobalt alloy, copper alloy, fiber-reinforced polymers, nickel, plastics, stainless steel, and titanium.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or electronics manufacturing technicians familiar with CNC drilling equipment and micro-tooling handling procedures. Secure the shank fully in the collet before operation and verify runout is within acceptable limits before drilling. At this diameter, feed rate and spindle speed must be dialed in carefully to avoid bit deflection or breakage. Inspect the cutting edges under magnification before and after use to confirm edge integrity.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 79\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal Inch)\u003c\/strong\u003e: 0.0145 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (mm)\u003c\/strong\u003e: 0.37 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 130 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Four Facet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter (Inch)\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter (mm)\u003c\/strong\u003e: 3.18 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length (Decimal Inch)\u003c\/strong\u003e: 0.2800 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length (mm)\u003c\/strong\u003e: 7.11 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (Inch)\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (mm)\u003c\/strong\u003e: 38.10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: -0.0003 to +0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 07279\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51741705699634,"sku":"07279","price":17.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5ce163246cfe39d24a90bf6ce3d901d5.jpg?v=1788833024","url":"https:\/\/voomisupply.com\/products\/sgs-07279-circuit-board-drill-bit-no-79-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}