{"product_id":"sgs-00908-ball-end-mill-0-0313-in-4-flute-solid-carbide","title":"Sgs 00908 Ball End Mill 0.0313 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SGS 00908 is a solid carbide ball end mill engineered for precision milling in demanding machining applications. With a 0.0313-inch (1\/32-inch) mill diameter and a 0.0938-inch (3\/32-inch) length of cut, this tool is built for tight-tolerance work in small-feature profiling, contouring, and slot milling. The four-flute geometry and 30-degree helix angle promote smooth chip evacuation and stable cutting action. Micrograin carbide construction delivers the hardness and edge retention required for consistent performance in ferrous and non-ferrous materials. This is a single-end, uncoated tool in SGS Series 1825, intended for use by machinists and CNC operators working at small-diameter scales.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for precision CNC milling operations where small features and fine surface finishes are required. Typical applications include die and mold work, engraving, micro-slot cutting, and 3D contouring on machining centers or high-speed CNC routers. The 0.125-inch (1\/8-inch) shank diameter fits standard ER collet systems and small-bore end mill holders. The 1.5-inch overall length provides clearance for most standard setups without excessive tool overhang. Right-hand cut and right-hand flute direction are standard for conventional CNC spindle rotation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0313-inch (1\/32-inch) ball nose diameter for small-feature and micro-detail milling\u003c\/li\u003e\n\u003cli\u003eFour-flute spiral design with 30-degree helix angle for smooth cutting and chip flow\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for edge retention and dimensional stability\u003c\/li\u003e\n\u003cli\u003e0.125-inch shank diameter compatible with standard ER collets and small end mill holders\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for use in a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eSingle-end design; Series 1825 regular length configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard selection for CNC machining centers and high-speed milling setups requiring a 1\/8-inch shank, 1\/32-inch diameter ball end mill in a four-flute solid carbide configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Seat the shank fully into the collet or end mill holder to the manufacturer-recommended engagement depth before torquing the retention nut. Verify tool runout with a dial indicator after installation, particularly critical at this diameter where small runout values have a proportionally large effect on tool life and surface finish. Inspect the cutting edges under magnification before use; solid carbide tools at this diameter are susceptible to edge chipping if mishandled during storage or setup.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0313 inches (1\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0938 inches (3\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0008 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 1825\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SGS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00908\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KYOCERA SGS PRECISION TOOLS","offers":[{"title":"Default Title","offer_id":51755343249714,"sku":"00908","price":31.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/22da201a9070cdc789c7d57f1c9ae107.jpg?v=1788953933","url":"https:\/\/voomisupply.com\/products\/sgs-00908-ball-end-mill-0-0313-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}