{"product_id":"seco-17016594-roughing-end-mill-7-8-in-5-flute-cobalt","title":"Seco 17016594 Roughing End Mill 7\/8 in 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17016594 is a single-end cobalt roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel and coated with TiCN for improved wear resistance and heat tolerance, this tool delivers the durability needed for heavy roughing cuts. The mill features a 7\/8 inch (0.8750 inch) cutting diameter, a 1-7\/8 inch length of cut, and a 4-1\/8 inch overall length. With 5 spiral flutes in a right-hand cutting and right-hand flute direction, it efficiently evacuates chips during high-material-removal passes. This end mill is installed and used by machinists and tool-and-die professionals in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis roughing end mill is suited for general-purpose milling of ferrous and non-ferrous metals in vertical and horizontal machining centers as well as manual knee mills. The 3\/4 inch shank diameter fits standard ER and side-lock toolholders common in production environments. It is center-cutting, allowing plunge entry without a pre-drilled start hole. The 30-degree maximum helix angle and spiral flute geometry help reduce chatter and cutting forces during rough passes on steel, stainless, and similar alloys. Series REC700 from SECO is built for demanding roughing applications where tool life under load is a primary concern.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt steel construction for toughness and heat resistance in demanding cuts\u003c\/li\u003e\n\u003cli\u003eTiCN coating extends tool life and reduces built-up edge on ferrous materials\u003c\/li\u003e\n\u003cli\u003e5 spiral flutes with right-hand cut and right-hand flute direction for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge entry\u003c\/li\u003e\n\u003cli\u003e30-degree maximum helix angle reduces chatter and cutting forces during roughing\u003c\/li\u003e\n\u003cli\u003e3\/4 inch shank diameter fits widely available collet and side-lock toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and direct-fit roughing end mill for standard 3\/4 inch bore toolholders used in vertical machining centers, horizontal mills, and manual knee mills performing roughing operations on ferrous and non-ferrous alloys.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by machinists using a calibrated torque wrench and appropriate toolholder per the machine manufacturer specifications. Ensure the spindle is fully powered down and locked before changing tooling. Inspect the shank and bore for chips or contamination before seating the tool. Follow your machine tool manufacturer guidelines and applicable shop safety standards when setting tool length offsets and running first-pass cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fractional)\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.8750 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-7\/8 inches (1.8750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REC700\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17016594\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558789513522,"sku":"17016594","price":166.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/75034769c6bcafee62465e34d1cfb3f7_4541eeee-2b34-4025-a58f-0560c60af7e7.jpg?v=1786420603","url":"https:\/\/voomisupply.com\/products\/seco-17016594-roughing-end-mill-7-8-in-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}