{"product_id":"seco-17016463-square-end-mill-1-5-in-6-flute-cobalt-ticn","title":"Seco 17016463 Square End Mill 1.5 in 6 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17016463 is a single-end square end mill designed for high-performance metal removal in demanding machining applications. Built from M42 cobalt high-speed steel and coated with TiCN, this tool delivers hardness and wear resistance needed for cutting steel, stainless steel, cast iron, aluminum and other non-ferrous materials, as well as high-temperature alloys. It features a 1.5-inch cutting diameter, a 4-inch length of cut, and a 30-degree helix spiral flute geometry that promotes efficient chip evacuation and smooth cutting action. Six flutes provide a high feed-rate capability and a fine surface finish on finished cuts.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for production milling in job shops, tool rooms, and manufacturing environments where extended reach and deep side-wall milling are required. The long-series design with a 4-inch length of cut makes it appropriate for slotting and peripheral milling in workpieces with significant depth. Right-hand cut and right-hand flute orientation is standard. The center-cutting capability allows it to be used for plunge entry without a pre-drilled hole. Primary workpiece material designations include ISO material groups P, M, K, N, and S.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for elevated heat and wear resistance compared to standard HSS\u003c\/li\u003e\n\u003cli\u003eTiCN coating increases surface hardness and reduces friction during cutting\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge entry into workpiece material\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes chip lift and reduces heat buildup at the cutting edge\u003c\/li\u003e\n\u003cli\u003eSix flutes deliver higher feed rates and improved finish on ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eLong-series length of cut suitable for deep slotting and extended-reach milling operations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe SECO 17016463 belongs to Series SPC408 and is intended for use with standard milling machine spindles and tool holders accepting a 1.25-inch straight shank. Compatible workpiece materials include steel, stainless steel, cast iron, aluminum and non-ferrous alloys, and high-temperature alloys per the input specifications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of this end mill is performed by machinists using compatible collet chucks, end mill holders, or hydraulic toolholders sized for a 1.25-inch shank diameter. Ensure the tool holder bore and collet are clean and undamaged before seating the shank to maintain TIR within acceptable limits. Verify spindle direction is set to right-hand rotation before engaging the workpiece. Follow machine tool manufacturer guidelines and applicable shop safety procedures for RPM, feed rate setup, and workholding before initiating cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPC408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17016463\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559385104690,"sku":"17016463","price":327.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/45e003f1f7c442eaf4a97369cd791473_c644b8d2-05eb-4994-95b3-612ec1adea12.jpg?v=1786430789","url":"https:\/\/voomisupply.com\/products\/seco-17016463-square-end-mill-1-5-in-6-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}