{"product_id":"seco-17016448-square-end-mill-1-in-6-flute-cobalt-ticn","title":"Seco 17016448 Square End Mill 1 in 6 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17016448 is a single-end cobalt square end mill designed for material removal in ferrous and non-ferrous machining applications. Built from M42 cobalt high-speed steel and finished with a TiCN coating, it delivers heat and wear resistance in demanding cutting environments. The tool measures 1 inch in cutting diameter with a 6-inch length of cut, a 1-inch shank diameter, and an 8.5-inch overall length. Six spiral flutes with a 30-degree helix angle promote efficient chip evacuation and smooth cutting action. Right-hand cut and right-hand flute orientation are standard. This end mill is centercutting, allowing plunge entry directly into the workpiece.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling steel, stainless steel, cast iron, aluminum and non-ferrous materials, and high-temperature alloys. It fits production and job-shop environments where extended reach into deep pockets or slots is required. The 6-inch length of cut makes it appropriate for deep-cavity work that shorter standard-length tools cannot reach. It is categorized as a regular-length tool within the SPC408 series and is configured for use without coolant-through capability.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for elevated red hardness and tool life in tough alloys\u003c\/li\u003e\n\u003cli\u003eTiCN coating reduces friction and improves wear resistance across multiple workpiece materials\u003c\/li\u003e\n\u003cli\u003eSix spiral flutes at 30-degree helix angle for effective chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without a pre-drilled entry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration — standard CNC and manual mill compatible\u003c\/li\u003e\n\u003cli\u003e1-inch shank diameter for rigid tool holding in standard collets or end mill holders\u003c\/li\u003e\n\u003cli\u003eNo chipbreaker, variable helix, or variable index — consistent, predictable cut geometry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-application end mill for CNC machining centers and manual mills accepting a 1-inch straight shank. Primary workpiece material ratings cover Steel (P), Stainless Steel (M), Cast Iron (K), Aluminum and Non-Ferrous (N), and High-Temp Alloy (S) per SECO material classification codes.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or toolroom technicians. The machine spindle must be fully stopped and locked out before changing tooling. Seat the 1-inch shank fully into the tool holder and torque set screws or collet nuts to the tool holder manufacturer specifications. Verify runout does not exceed the 0.001-inch TIR maximum before beginning a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 to 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPC408\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17016448\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51563636785458,"sku":"17016448","price":282.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/45e003f1f7c442eaf4a97369cd791473_03c08199-1ef7-42b8-bdf1-fc2b0a3aaf57.jpg?v=1786500032","url":"https:\/\/voomisupply.com\/products\/seco-17016448-square-end-mill-1-in-6-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}