{"product_id":"seco-17016440-square-end-mill-7-8-in-4-flute-cobalt-ticn","title":"Seco 17016440 Square End Mill 7\/8 in 4 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17016440 is a single-end square end mill engineered for demanding metal-removal applications across a wide range of ferrous and non-ferrous materials. Built from M42 cobalt high-speed steel and coated with TiCN (Titanium Carbonitride), it delivers superior hardness and heat resistance compared to standard HSS tooling. The cutter measures 0.8750 inches in diameter with a 3.5-inch length of cut and a 5.75-inch overall length, giving it the reach needed for deeper pocketing and slotting operations. Four spiral flutes with a 30-degree helix angle promote efficient chip evacuation, and the centercutting geometry allows direct plunge entry without a pre-drilled pilot hole. This tool belongs to SECO Series SPC408 and is intended for professional machinists and toolroom applications.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling steel, stainless steel, cast iron, aluminum, non-ferrous alloys, and high-temperature alloys. Its long-flute design makes it a practical choice for deep-cavity milling, side milling, and slotting where extended reach is required. The right-hand cut and right-hand spiral flute configuration is the standard orientation for conventional vertical and horizontal milling machines as well as CNC machining centers. Applications typically include job shops, production machining, and maintenance-repair-and-overhaul environments where versatile ferrous-capable tooling is kept on hand.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt substrate provides elevated red hardness for cutting harder steels and stainless grades\u003c\/li\u003e\n  \u003cli\u003eTiCN coating reduces friction and extends tool life versus uncoated cobalt\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with spiral flutes for smooth cutting action and efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eLong flute series with 3.5-inch length of cut for deep-cavity and extended-reach operations\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with matched 0.8750-inch shank for direct collet or end mill holder mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eRated for use on steel, stainless steel, cast iron, aluminum and non-ferrous materials, and high-temperature alloys. Compatible with standard 7\/8-inch collets, end mill holders, and Weldon-style side-lock holders used on CNC machining centers and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for toolholder torque and runout. Verify the spindle is fully stopped and locked out before loading or removing the end mill. Confirm the holder bore and shank are clean and free of chips before seating the tool. Maximum TIR for this cutter is 0.0010 inches, so runout should be checked at setup and corrected before cutting to protect edge life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.8750 inches (7\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.5000 inches (3-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.7500 inches (5-3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.8750 inches (7\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 \/ 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPC408\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17016440\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557706039602,"sku":"17016440","price":165.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/45e003f1f7c442eaf4a97369cd791473_ee1dddb7-4dfd-4148-959f-61871cbe4307.jpg?v=1786393200","url":"https:\/\/voomisupply.com\/products\/seco-17016440-square-end-mill-7-8-in-4-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}