{"product_id":"seco-17016375-square-end-mill-0-5in-2-flute-cobalt-ticn","title":"Seco 17016375 Square End Mill 0.5in 2 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17016375 is a single-end square end mill from the SP205 series, ground from M42 cobalt high-speed steel and finished with a TiCN coating. It carries a 0.5-inch cutting diameter, a 1-inch length of cut, and a 3-inch overall length on a 0.5-inch straight shank. The 30-degree right-hand spiral flutes — two total — are centercutting, allowing plunge entry without a pre-drilled pilot hole. TiCN coating adds surface hardness and oxidation resistance over uncoated cobalt, extending tool life in abrasive and moderately hard workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling steel, stainless steel, cast iron, and high-temperature alloys — material groups P, M, K, and S in ISO designation. Short-length geometry keeps the tool rigid in general-purpose slotting, profiling, and peripheral milling operations on manual mills and CNC machining centers. The right-hand cut and right-hand flute configuration is standard for conventional and climb milling in these material families. It is a practical choice for job shops and production environments working across a range of ferrous materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for toughness and heat resistance in ferrous materials\u003c\/li\u003e\n  \u003cli\u003eTiCN coating reduces friction and wear compared to uncoated tooling\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables direct plunge milling without a starter hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances chip evacuation and cutting edge strength\u003c\/li\u003e\n  \u003cli\u003eShort-length (SP205 series) design maximizes rigidity in slotting and profiling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute — standard orientation for most milling setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in 0.5-inch collets, ER-style chucks, or end mill holders on vertical milling machines and CNC machining centers. Primary workpiece materials are steel, stainless steel, cast iron, and high-temperature alloys (ISO material groups P, M, K, S).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eA licensed machinist or qualified CNC operator should install and run this tooling. Ensure the spindle is fully stopped and the machine is locked out before changing tooling. Verify the shank is clean and seated fully in the holder before tightening; runout should not exceed the rated 0.001-inch TIR maximum. Consult the machine and tooling manufacturer for recommended speeds and feeds based on workpiece material and depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SP205\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.001 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17016375\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51561011970354,"sku":"17016375","price":52.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/686dc3695ff3f36c37307c60b1cee92c_b1654e9c-4501-4560-a23d-3d180c9fc0d7.jpg?v=1786461377","url":"https:\/\/voomisupply.com\/products\/seco-17016375-square-end-mill-0-5in-2-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}