{"product_id":"seco-17015176-roughing-end-mill-1-2-in-4-flute-cobalt-ticn","title":"Seco 17015176 Roughing End Mill 1\/2 in 4 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17015176 is a single-end roughing end mill designed for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel and coated with TiCN, this tool handles tough ferrous and non-ferrous materials where standard HSS tooling wears too quickly. It features 4 right-hand spiral flutes with a 30-degree maximum helix angle, a 1 inch length of cut, and a 3 inch overall length. The stub-length profile keeps the tool rigid under heavy chip loads. Installation is performed by qualified machinists or toolroom personnel working with vertical mills, knee mills, or CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThis roughing end mill suits production and job-shop environments where rapid stock removal is the priority before finishing passes. The 1\/2 inch diameter and stub-length configuration make it well suited to short-reach pocketing, slotting, and profile roughing operations in steel, stainless, and similar alloys. The TiCN coating improves surface hardness and reduces built-up edge, extending tool life in interrupted cuts and abrasive materials. It is a non-centercutting design, so plunge entry is not recommended without a pre-drilled start hole.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt HSS construction for improved heat and wear resistance over standard HSS\u003c\/li\u003e\n  \u003cli\u003eTiCN coating reduces friction and extends tool life in ferrous and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e4 right-hand spiral flutes with 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStub-length body (1 inch LOC, 3 inch OAL) provides rigidity under heavy roughing loads\u003c\/li\u003e\n  \u003cli\u003eSeries REM710 roughing geometry for high material removal rates\u003c\/li\u003e\n  \u003cli\u003eNon-centercutting design requires a pre-drilled entry point for plunge operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for 1\/2 inch collets, end mill holders, and milling chucks accepting a 1\/2 inch straight shank in vertical, horizontal, and CNC milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. The spindle must be fully stopped and the machine locked out before changing tooling. Use a properly sized end mill holder or collet rated for 1\/2 inch shank diameter and ensure the shank is seated to the recommended engagement depth per the holder manufacturer. This tool is not designed for plunge cutting; always use a ramping or pre-drilled entry strategy when accessing closed pockets.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17015176\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51561875013938,"sku":"17015176","price":87.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9762c606b43d74a8e758b625e51feaa2.jpg?v=1786469423","url":"https:\/\/voomisupply.com\/products\/seco-17015176-roughing-end-mill-1-2-in-4-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}