{"product_id":"seco-17014863-roughing-end-mill-1-in-5-flute-cobalt-tialn","title":"Seco 17014863 Roughing End Mill 1 in 5 Flute Cobalt Tialn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17014863 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel and coated with TiAlN for heat and wear resistance, this tool handles demanding cuts in ferrous metals, stainless steels, and similar hard materials. It features a 1 inch mill diameter, 5 flutes for improved chip load distribution, and a right-hand spiral flute geometry with a 30-degree maximum helix angle. The REM445 series design is suited for machinists and tool-and-die professionals running manual or CNC milling equipment in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis roughing end mill is used in vertical and horizontal milling applications where fast stock removal is the priority. The 5-flute configuration allows for heavier chip loads compared to standard 4-flute finishers, making it well suited for roughing passes on ferrous and non-ferrous workpieces in production machining, tool rooms, and maintenance shops. The 1 inch shank diameter matches the mill diameter for straightforward collet or end mill holder setup. No coolant-through capability means it is intended for flood or mist coolant applied externally.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for elevated heat resistance during heavy roughing cuts\u003c\/li\u003e\n\u003cli\u003eTiAlN coating extends tool life in dry and semi-dry cutting conditions\u003c\/li\u003e\n\u003cli\u003e5-flute design increases chip load capacity and surface contact over standard 4-flute tools\u003c\/li\u003e\n\u003cli\u003e30-degree maximum helix angle promotes smooth chip evacuation in spiral flute geometry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle operation\u003c\/li\u003e\n\u003cli\u003eSingle-end configuration with a 2 inch length of cut and 4.5 inch overall length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for 1 inch straight-shank end mill holders, collet chucks, and milling machine spindles accepting 1 inch shank tooling. Part of the SECO REM445 roughing end mill series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Power down and lock out the milling machine spindle before installing or removing the tool. Seat the shank fully in the holder to the recommended insertion depth and torque the set screw or collet nut per the holder manufacturer specifications. Inspect the cutting edges for chips or damage before each use; do not run a damaged end mill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle (Maximum)\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM445\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17014863\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558522028338,"sku":"17014863","price":176.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c7c3c4d51db8951d51b54b73251f1324.jpg?v=1786414308","url":"https:\/\/voomisupply.com\/products\/seco-17014863-roughing-end-mill-1-in-5-flute-cobalt-tialn","provider":"Voomi Supply","version":"1.0","type":"link"}