{"product_id":"seco-17014829-roughing-end-mill-1-2-in-4-flute-cobalt","title":"Seco 17014829 Roughing End Mill 1\/2 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17014829 is a single-end cobalt roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel and coated with TiAlN for heat and wear resistance, this tool handles tough ferrous and non-ferrous materials at elevated cutting temperatures. It features a 1\/2 inch mill diameter, 4 spiral flutes, a 3 inch length of cut, and a 5 inch overall length. The right-hand cut and right-hand flute direction are standard for conventional CNC and manual milling setups. It is used by machinists and tool and die professionals in job shops, maintenance facilities, and production environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for roughing passes on steel, stainless steel, and similar materials where high chip loads and fast stock removal are the priority. The TiAlN coating extends tool life in dry or semi-dry cutting conditions where heat buildup is a concern. The regular-length geometry fits standard milling chucks and collet holders with a 1\/2 inch bore. It does not include coolant-through capability, so it is best applied in open-cut or air-blast setups. The REM445 series designation identifies it within SECO's cobalt roughing end mill line.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for toughness and red-hardness retention\u003c\/li\u003e\n\u003cli\u003eTiAlN coating for extended tool life in high-temperature cutting\u003c\/li\u003e\n\u003cli\u003e4 spiral flutes with 30-degree maximum helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard milling spindles\u003c\/li\u003e\n\u003cli\u003e3 inch length of cut on a regular-length 5 inch OAL body\u003c\/li\u003e\n\u003cli\u003eNon-centercutting design — intended for peripheral and side milling, not plunge cuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style roughing end mill replacement for use in standard 1\/2 inch collet chucks, end mill holders, and milling machine spindles accepting a 1\/2 inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists following standard toolholding procedures. Power down and lock out the spindle before seating or removing the tool. Seat the shank fully in the collet or holder to the recommended engagement depth and torque the retention fastener per the toolholder manufacturer specification. Verify runout with a dial indicator before taking the first cut, as excessive runout accelerates tool wear and reduces surface finish quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle (Maximum)\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM445\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17014829\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559129252146,"sku":"17014829","price":141.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bc02fbdd14cb29a2ef9705c81c46f6d9_228680cc-5a3f-49de-b180-cf578045be91.jpg?v=1786428585","url":"https:\/\/voomisupply.com\/products\/seco-17014829-roughing-end-mill-1-2-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}