{"product_id":"seco-17014137-roughing-end-mill-1-in-5-flute-cobalt","title":"Seco 17014137 Roughing End Mill 1 in 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17014137 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a bright uncoated finish, this tool delivers the heat and wear resistance needed for demanding cuts. It features a 1 inch mill diameter, 5 flutes, and a 30-degree maximum helix angle. The spiral flute geometry and right-hand cutting direction are suited for conventional roughing passes where chip evacuation and cutting edge durability are the primary concerns. Machinists and tool-and-die professionals select this end mill for roughing operations where carbide is not required or cost-effective.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in vertical and horizontal milling machines, machining centers, and manual knee mills. The 3 inch length of cut and 5.5 inch overall length make it well-suited for deeper roughing passes on block stock, fixture work, and general-purpose shop applications. The 1 inch shank diameter seats directly into standard R8, CAT, or BT toolholders with matching bore size. The REM710 series targets production and job-shop environments where cobalt tooling is preferred for interrupted cuts or work-hardening materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction provides elevated red hardness compared to standard M2 HSS\u003c\/li\u003e\n\u003cli\u003e5-flute configuration increases feed rate potential versus 4-flute end mills of the same diameter\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle balances chip flow and radial cutting force\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suitable for re-sharpening and use with cutting oils\u003c\/li\u003e\n\u003cli\u003eSingle-end design with right-hand flute direction and right-hand cut\u003c\/li\u003e\n\u003cli\u003eRegular length type with 3 inch length of cut and 5.5 inch overall length\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style roughing end mill for use in standard 1 inch bore milling toolholders across vertical machining centers and manual mills requiring single-end cobalt roughing tools.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully powered down and locked out before inserting or removing tooling. Seat the shank fully into the toolholder to the recommended engagement depth and torque the drawbar or set screws per the toolholder manufacturer specifications. Inspect the cutting edges for chips or damage before each use, and confirm workpiece fixturing is secure before initiating a roughing pass.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17014137\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558705332530,"sku":"17014137","price":206.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a98fd236090fa45a0e54e321483dac03_052c7e15-fb61-4997-b048-12d7cebbb01f.jpg?v=1786418499","url":"https:\/\/voomisupply.com\/products\/seco-17014137-roughing-end-mill-1-in-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}