{"product_id":"seco-17014120-roughing-end-mill-7-8-in-5-flute-cobalt","title":"Seco 17014120 Roughing End Mill 7\/8 in 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17014120 is a single-end cobalt roughing end mill designed for aggressive material removal in ferrous and non-ferrous machining applications. Built from M42 cobalt high-speed steel, this tool handles interrupted cuts and tough alloys where standard HSS tooling falls short. The 7\/8 inch (0.8750 inch) mill diameter pairs with a 1-7\/8 inch length of cut and 4-1\/8 inch overall length, making it a regular-length tool suited to general-purpose roughing work. Five right-hand spiral flutes at a 30-degree maximum helix angle break chips efficiently and reduce chatter during heavy stock removal passes. The bright, uncoated finish is standard for cobalt roughing end mills used with conventional cutting fluids. This is a professional-grade tool installed and operated by machinists and toolroom technicians.\u003c\/p\u003e\u003cp\u003eThis end mill is used in vertical and horizontal milling machines, machining centers, and CNC knee mills where roughing passes precede finish milling operations. It is suited for applications in steel, stainless, cast iron, and high-temp alloys where chip load demands exceed the capacity of standard uncoated HSS end mills. The 7\/8 inch shank diameter matches standard ER and R8 collet toolholders common in production and job-shop environments. It is not center-cutting, so it is not intended for plunge entry without a pre-drilled starting hole.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for improved red hardness and wear resistance over standard M2 HSS\u003c\/li\u003e\n\u003cli\u003e5-flute geometry increases feed rate capability compared to 4-flute tools at equivalent chip load per tooth\u003c\/li\u003e\n\u003cli\u003e30-degree maximum helix angle promotes smooth chip evacuation in deeper cuts\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute spiral — compatible with standard spindle rotation on most milling machines\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish works with oil-based and water-soluble cutting fluids without adhesion concerns\u003c\/li\u003e\n\u003cli\u003eSingle-end design; part of the REM710 series for roughing applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use roughing end mill for standard 7\/8 inch collet and end mill holders used in general milling operations. No coolant-through feature; requires external flood or mist coolant delivery.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by qualified machinists or toolroom personnel familiar with milling machine setup and cutting tool safety. Secure the shank fully in a collet or end mill holder to the manufacturer-specified engagement depth before operation. De-energize and lock out the machine spindle before changing or inspecting tooling per standard OSHA lockout\/tagout procedures. Do not use this tool for plunge cutting — it is not center-cutting and requires a pre-bored entry point for pocket milling operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fractional)\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.8750 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-7\/8 inches (1.8750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/8 inch (0.8750 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17014120\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51562109665586,"sku":"17014120","price":155.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a98fd236090fa45a0e54e321483dac03_1e3dab97-bd7c-4509-ae14-70aeb5a30248.jpg?v=1786471790","url":"https:\/\/voomisupply.com\/products\/seco-17014120-roughing-end-mill-7-8-in-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}