{"product_id":"seco-17013528-roughing-end-mill-2in-8-flute-cobalt-ticn","title":"Seco 17013528 Roughing End Mill 2in 8 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17013528 is a single-end cobalt roughing end mill designed for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel with a TiCN coating, it delivers improved wear resistance and heat tolerance compared to standard HSS tooling. The 2-inch cutting diameter and 8-flute configuration allow high feed rates while managing chip load across each flute. At 2 inches length of cut and 4.5 inches overall length, this is a regular-length tool suited for most standard-depth roughing passes. A licensed machinist or toolroom professional installs and operates this end mill in CNC or manual milling equipment.\u003c\/p\u003e\n\u003cp\u003eThis end mill is used in production and job-shop machining environments where rapid stock removal is the priority before finishing passes. The REM710 series roughing geometry is appropriate for machining ferrous metals and harder alloys where a standard end mill would deflect or wear prematurely. The 1.25-inch shank diameter fits standard ER or side-lock holders common in vertical machining centers and knee mills. Right-hand cut and right-hand spiral flutes are standard orientation for conventional milling setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for elevated heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n  \u003cli\u003eTiCN coating extends tool life and reduces built-up edge on ferrous materials\u003c\/li\u003e\n  \u003cli\u003e8-flute design distributes chip load and supports higher feed rates in roughing passes\u003c\/li\u003e\n  \u003cli\u003e30-degree maximum helix angle balances cutting force and chip evacuation\u003c\/li\u003e\n  \u003cli\u003e1.25-inch shank diameter with tight tolerance (-0.0001 to -0.0005 inches) for secure holder grip\u003c\/li\u003e\n  \u003cli\u003eSingle-end, non-centercutting geometry — not intended for plunge cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style roughing end mill for use in standard milling machine spindles and tool holders accepting a 1.25-inch shank diameter. Verify holder bore tolerance and drawbar requirements before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or toolroom technician. Power down and lock out the milling machine spindle before inserting or removing the tool from its holder. Ensure the holder bore is clean and free of chips before seating the shank. This tool is non-centercutting and must not be used for direct plunge operations — ramp or helical entry paths are required.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.006 to -0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17013528\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557867487538,"sku":"17013528","price":460.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a98fd236090fa45a0e54e321483dac03_58329a88-065d-4a9c-a548-b6d7e919aebf.jpg?v=1786396821","url":"https:\/\/voomisupply.com\/products\/seco-17013528-roughing-end-mill-2in-8-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}