{"product_id":"seco-17013525-roughing-end-mill-1-3-4-in-6-flute-cobalt","title":"Seco 17013525 Roughing End Mill 1-3\/4 in 6 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17013525 is a single-end roughing end mill designed for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel and finished with a TiCN coating, this tool handles tough ferrous and non-ferrous materials with extended tool life. It features a 1.75-inch milling diameter, a 1.25-inch shank diameter, and 6 spiral flutes with a 30-degree maximum helix angle. The right-hand cutting and right-hand flute direction make it a standard fit for conventional milling setups. Machinists and tool-and-die professionals use this end mill for roughing passes where chip evacuation and heat resistance are priorities.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in vertical and horizontal machining centers as well as manual knee mills capable of accepting a 1.25-inch shank. The 4-inch length of cut and 6.5-inch overall length make it appropriate for deep-pocket roughing and profiling operations where a standard-reach tool is acceptable. The REM710 series designation places it in SECO's line of high-performance roughing tools. It is not center-cutting, so it is not intended for plunge entry. Pre-drill or ramp entry is required when starting cuts in solid material.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for improved heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n\u003cli\u003eTiCN coating reduces friction and extends tool life in abrasive materials\u003c\/li\u003e\n\u003cli\u003e6 spiral flutes with 30-degree helix angle for efficient chip evacuation during roughing\u003c\/li\u003e\n\u003cli\u003e1.75-inch mill diameter with a 4-inch length of cut for deep-pocket applications\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute, single-end configuration for standard milling setups\u003c\/li\u003e\n\u003cli\u003eNot center-cutting — ramp or pre-drilled entry required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard single-end roughing end mill with a 1.25-inch straight shank, compatible with milling machine spindles and tool holders accepting that shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with end mill tooling and mill setup procedures. Power down and lock out the machine before inserting or removing the end mill from the tool holder. Ensure the shank is fully seated and that the tool holder is torqued to the machine manufacturer's specification. Because this tool is not center-cutting, avoid plunge entry into solid material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.006 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17013525\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558153453874,"sku":"17013525","price":494.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a98fd236090fa45a0e54e321483dac03_d02dc3ec-d3f0-4b5f-a8b9-d982b9e16cff.jpg?v=1786404744","url":"https:\/\/voomisupply.com\/products\/seco-17013525-roughing-end-mill-1-3-4-in-6-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}