{"product_id":"seco-17013507-roughing-end-mill-1-in-5-flute-cobalt-ticn","title":"Seco 17013507 Roughing End Mill 1 in 5 Flute Cobalt Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17013507 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a TiCN coating, it delivers hardness and heat resistance suited for ferrous and non-ferrous metals. The 1-inch mill diameter pairs with a 3\/4-inch length of cut and a 5-flute geometry that breaks chips efficiently, reducing cutting forces and tool deflection. The right-hand spiral flutes and 30-degree maximum helix angle support smooth, stable cuts in a variety of milling setups. This tool is installed and operated by machinists and CNC programmers in job shop, production, and maintenance environments.\u003c\/p\u003e\u003cp\u003eThe 17013507 is suited for roughing passes in vertical and horizontal milling machine setups, including CNC machining centers. Its 3\/4-inch shank diameter fits standard ER and side-lock toolholders common in production and toolroom environments. The regular-length geometry makes it a practical choice for general-purpose roughing where extended reach is not required. It is not center-cutting, so it is not designed for plunge entry. The TiCN coating helps extend tool life in applications involving steel, stainless steel, cast iron, and similar materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for elevated hardness and heat resistance over standard HSS\u003c\/li\u003e\n\u003cli\u003eTiCN coating reduces friction and extends tool life in ferrous machining\u003c\/li\u003e\n\u003cli\u003e5 flutes with right-hand spiral geometry for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003e30-degree maximum helix angle supports stable, chatter-resistant cuts\u003c\/li\u003e\n\u003cli\u003e3\/4-inch shank diameter fits standard milling toolholders\u003c\/li\u003e\n\u003cli\u003eSingle-end, regular-length design for general-purpose roughing applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard milling toolholders accepting a 3\/4-inch shank diameter. Part of the SECO REM710 series for roughing end mill applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or CNC setup technician. Secure the shank fully in a clean, properly sized collet or side-lock holder and verify runout before cutting. Power down and lock out the spindle before changing tooling. This tool is not center-cutting and must not be used for plunge milling without a pre-drilled entry hole.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Helix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.003 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.062 to -0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: REM710\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17013507\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51562590273842,"sku":"17013507","price":141.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7190103139b5d6a0202e5a33ee25b6f3.jpg?v=1786480285","url":"https:\/\/voomisupply.com\/products\/seco-17013507-roughing-end-mill-1-in-5-flute-cobalt-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}