{"product_id":"seco-17013193-corner-chamfer-end-mill-1-5-in-4-flute-cobalt","title":"Seco 17013193 Corner Chamfer End Mill 1.5 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17013193 is a corner chamfer end mill designed for high-performance milling in demanding materials including stainless steel, superalloys, and titanium. Built from M42 cobalt high-speed steel with a bright\/uncoated finish, this tool features a 1.5-inch mill diameter, 4-inch length of cut, and a 45-degree chamfer angle with a 0.0400-inch chamfer width. The four-flute, right-hand cutting configuration with a super-close pitch and helical flute geometry supports aggressive material removal rates while maintaining edge stability. It is a single-end, centercutting design, making it suitable for plunging, ramping, and slotting operations performed by machinists and toolroom professionals.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for shouldering, slotting, rampdown, helical interpolation, drill mill operations, and plunging and recessing applications. The VFP635 series is engineered primarily for work in stainless steel, superalloys, and titanium where tool rigidity and edge toughness are critical. The Weldon flat shank measures 1.25 inches in diameter, providing secure clamping in standard Weldon-style holders. The 6.5-inch overall length accommodates moderate reach requirements in vertical and horizontal machining center setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for toughness in stainless steel, superalloys, and titanium\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer angle with 0.0400-inch chamfer width for consistent edge chamfering\u003c\/li\u003e\n  \u003cli\u003eFour helical flutes with super-close pitch for roughing and high material removal\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables plunging, rampdown, and helical interpolation\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank for positive, non-slip clamping in standard tool holders\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish suited for use with or without cutting fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard Weldon-style end mill holders accepting a 1.25-inch shank diameter. Primary workpiece materials are stainless steel, superalloys, and titanium (material codes M and S). Part of the SECO VFP635 series; manufacturer catalog number VFP635-1.500-P3-C040.3-Z6.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or toolroom technicians using a Weldon-style end mill holder and appropriate set screws torqued per machine tool manufacturer specifications. Ensure the spindle is fully stopped and locked out before tool changes. Confirm shank seating depth and runout with a dial indicator before commencing cuts. Coolant through is not supported on this tool; apply cutting fluid externally as required by the workpiece material and operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0400 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Super Close\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Superalloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VFP635\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17013193\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557863686450,"sku":"17013193","price":572.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c2d4d0d40708e309554cc8073a665de_d1929530-8b84-440c-a773-be796653c71a.jpg?v=1786396743","url":"https:\/\/voomisupply.com\/products\/seco-17013193-corner-chamfer-end-mill-1-5-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}