{"product_id":"seco-17013182-corner-chamfer-end-mill-1in-4-flute-cobalt","title":"Seco 17013182 Corner Chamfer End Mill 1in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17013182 is a corner chamfer end mill engineered for demanding material removal in stainless steel, superalloys, and titanium. Built from M42 cobalt high-speed steel, it features a 1-inch cutting diameter, a 4-inch length of cut, and four helical flutes with a super-close pitch for stable, chatter-resistant performance. The 45-degree chamfer at 0.0300 inches wide handles edge-breaking and chamfering in a single pass. With a 6.5-inch overall length and a 1-inch Weldon flat shank, this tool is sized for rigid setups in vertical and horizontal machining centers. Machinists working exotic alloys and high-strength materials will recognize this as a workhorse roughing tool for slotting, shouldering, ramp-down, and helical interpolation operations.\u003c\/p\u003e\n\u003cp\u003eThe 17013182 belongs to the SECO VFP635 series (catalog number VFP435-1.000-D4-C030.3-Z4), which targets long-reach roughing and finishing in difficult-to-machine materials. Its centercutting geometry supports plunging and recessing operations directly into the workpiece without a pre-drilled pilot hole. The single-end configuration and right-hand flute direction suit standard CNC milling setups. This tool is appropriate for job shops, aerospace component machining, and industrial manufacturing environments where stainless steel, nickel-based superalloys, and titanium are common workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for heat and wear resistance in high-alloy workpiece materials\u003c\/li\u003e\n  \u003cli\u003e4-flute helical design with super-close pitch reduces vibration during roughing passes\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer at 0.0300 inches wide for one-step edge chamfering and blending\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables direct plunging, recessing, and drill-mill operations\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank provides positive drive and minimizes pullout risk under heavy cuts\u003c\/li\u003e\n  \u003cli\u003eSupports shouldering, slotting, ramp-down, and helical interpolation in a single tool\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish — no coating delamination risk; re-sharpen without coating loss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-fit tooling option for CNC machining centers accepting a 1-inch straight shank with Weldon flat. Primary workpiece materials are stainless steel, superalloys, and titanium (ISO material groups M and S).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation requires a collet chuck, end mill holder, or Weldon-style side-lock holder rated for a 1-inch shank diameter. Verify holder runout before seating the tool, as runout amplified over a 4-inch reach can accelerate edge wear on difficult materials. Always spin the spindle in the correct right-hand cutting direction and confirm workholding is rigid before engaging a full-depth roughing pass. Follow your machine tool manufacturer and shop safety guidelines for speeds, feeds, and coolant strategy when cutting titanium or superalloys.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0300 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Medium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Super Close\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel; Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0020 to -0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VFP635\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17013182\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558020874546,"sku":"17013182","price":315.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/db6bb7b654545c46aba03f937d975d87.jpg?v=1786401076","url":"https:\/\/voomisupply.com\/products\/seco-17013182-corner-chamfer-end-mill-1in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}