{"product_id":"seco-17011648-square-end-mill-9-16-inch-2-flute-cobalt","title":"Seco 17011648 Square End Mill 9\/16 Inch 2 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17011648 is a 2-flute cobalt square end mill designed for material removal in steel, stainless steel, cast iron, and high-temperature alloys. Ground from M42 cobalt high-speed steel, it delivers toughness and heat resistance that standard HSS tooling cannot match. The cutting diameter is 0.5625 inches (9\/16 inch) with a 1.125-inch length of cut and a 0.500-inch shank diameter. Overall length is 3.125 inches. The bright uncoated finish is standard for cobalt tools intended for re-sharpening. This end mill is used by machinists and tool-and-die technicians on manual mills and CNC machining centers.\u003c\/p\u003e\n\u003cp\u003eThe SP205 series short-length end mill is suited for general milling operations including slotting, side milling, and profiling in ferrous materials. The centercutting geometry allows plunge entry directly into workpiece material, eliminating the need for a pre-drilled pilot hole in many setups. Right-hand cut with right-hand spiral flutes at a 30-degree helix angle supports efficient chip evacuation and stable cutting in steel and stainless steel applications. The short length-of-cut designation keeps tool overhang minimal, improving rigidity and reducing chatter during aggressive cuts.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for elevated heat resistance and edge retention in ferrous alloys\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth chip flow and stable cutting action\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish supports re-sharpening and is compatible with cutting fluids\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute — standard orientation for conventional and climb milling\u003c\/li\u003e\n  \u003cli\u003eShort series length minimizes overhang for maximum rigidity in tight setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct application tooling for standard 1\/2-inch collets, end mill holders, and Weldon-flat holders used on manual knee mills and CNC vertical machining centers. Primary workpiece materials include steel (P), stainless steel (M), cast iron (K), and high-temperature alloys (S) per ISO material classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using an appropriate collet or end mill holder rated for the 1\/2-inch shank diameter. Ensure the machine spindle is fully stopped and locked before seating or removing the tool. Follow your shop's toolholding torque procedure per the holder manufacturer's specification. Inspect the shank and collet bore for chips or damage before each use to maintain runout within the rated TIR maximum of 0.0010 inches.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 9\/16 inch (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/8 inches (1.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/8 inches (3.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SP205\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0620 to 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17011648\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51561890742578,"sku":"17011648","price":71.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/686dc3695ff3f36c37307c60b1cee92c_0e06d9ea-3d80-4bf5-b7aa-3584135a7e3c.jpg?v=1786469571","url":"https:\/\/voomisupply.com\/products\/seco-17011648-square-end-mill-9-16-inch-2-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}