{"product_id":"seco-17007085-corner-radius-end-mill-1in-5-flute-carbide","title":"Seco 17007085 Corner Radius End Mill 1in 5 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17007085 is a solid carbide corner radius end mill designed for high-performance milling in demanding materials including steel, stainless steel, superalloys, titanium, and hard materials. It features a 1 inch cutting diameter, a 0.1900 inch corner radius, and five flutes with a 45-degree high helix angle. The AlTiN PVD coating provides thermal resistance and extended tool life under aggressive cutting conditions. This is a single-end, centercutting tool, meaning it can plunge directly into the workpiece as well as perform peripheral and finishing passes. Machinists and CNC toolroom operators use this tool in production and toolroom environments where tight tolerances and surface finish quality are required.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for finishing operations on ferrous and exotic alloy workpieces. The short-length-of-cut geometry and straight cylindrical shank make it compatible with standard toolholders used in vertical and horizontal machining centers. The S545R series designation places it within SECO's line of high-performance corner radius tools optimized for right-hand cutting and right-hand flute direction. At 4 inches overall length with a 2 inch length of cut, it provides a balanced ratio of reach to rigidity, reducing deflection during finishing passes on steel and hardened materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and exotic alloy materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating for high-temperature performance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e0.1900 inch corner radius reduces stress concentration and improves edge strength at workpiece corners\u003c\/li\u003e\n  \u003cli\u003eFive-flute, high-helix (45 degree) spiral geometry optimized for finishing passes and smooth chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute, normal pitch — compatible with standard CNC toolholder setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-cylindrical toolholders accepting a 1 inch shank diameter. Intended for machining steel, stainless steel, superalloys, titanium, and hard materials. Material application codes P, M, S, and H per ISO workpiece material classification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed with the machine in a full stop, locked-out state per applicable shop safety and OSHA lockout\/tagout procedures. Seat the straight cylindrical shank fully into the toolholder and torque the retention mechanism to the toolholder manufacturer's specification. Verify runout against the stated TIR maximum of 0.0005 inch before beginning the cut. Confirm correct spindle direction (right-hand) and appropriate feed and speed parameters for the workpiece material before engaging the tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.1900 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Normal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel; Stainless Steel; Superalloys and Titanium; Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0020 \/ 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: -0.0600 \/ 0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: S545R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.36 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17007085\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558941458738,"sku":"17007085","price":592.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0977885c2b84cb1b80008a424d0f189d.jpg?v=1786423581","url":"https:\/\/voomisupply.com\/products\/seco-17007085-corner-radius-end-mill-1in-5-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}