{"product_id":"seco-17003614-square-end-mill-0-5in-5-flute-solid-carbide","title":"Seco 17003614 Square End Mill 0.5in 5 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17003614 is a single-end square end mill designed for precision milling across a wide range of metalworking applications. Built from micrograin solid carbide and coated with AlTiN (aluminum titanium nitride), it delivers high hardness and heat resistance at the cutting edge. The tool runs a 5-flute, 45-degree spiral helix geometry with a right-hand cut and right-hand flute direction. It is centercutting, allowing plunge entry. The 0.5 inch diameter pairs with a 3.125 inch length of cut and a 6 inch overall length on a straight 0.5 inch shank. Licensed machinists and CNC operators in production shops are the primary installers of this tool.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling steel, stainless steel, cast iron, high-temperature alloys, aluminum and non-ferrous metals, and hardened materials. Its AlTiN coating and micrograin carbide substrate make it a practical choice for aggressive cuts in difficult-to-machine materials where heat generation and tool wear are primary concerns. The regular-length geometry fits standard toolholders and is appropriate for both roughing and finishing passes on vertical and horizontal machining centers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides thermal protection in high-heat cutting conditions\u003c\/li\u003e\n\u003cli\u003e5-flute design increases chip load capacity and surface finish quality\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle promotes smooth cutting action and efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry allows direct plunge milling without pre-drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute with straight shank for broad toolholder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003ePart of the SECO S545 series. Designed for use with standard straight-shank toolholders accepting a 0.5 inch shank diameter on CNC and manual milling machines. Compatible workpiece materials include steel, stainless steel, cast iron, high-temperature alloys, aluminum and non-ferrous metals, and hardened materials per manufacturer designation codes P, M, K, S, N, and H.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. The tool must be secured in a clean, properly sized collet or toolholder and torqued to the toolholder manufacturer's specification before operation. Confirm runout does not exceed the rated TIR maximum of 0.0005 inches using a dial indicator before cutting. Always verify spindle direction matches the right-hand cut designation before engaging the workpiece.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0000 \/ -0.0020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0015 \/ -0.0015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: S545\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.53 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17003614\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559470956850,"sku":"17003614","price":369.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b54be523fae4744bf48bfc7a307f19ca_b3c0797c-29eb-475a-abd2-3eefa49c752d.jpg?v=1786433396","url":"https:\/\/voomisupply.com\/products\/seco-17003614-square-end-mill-0-5in-5-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}