{"product_id":"seco-17002950-square-end-mill-5-32-in-2-flute-solid-carbide","title":"Seco 17002950 Square End Mill 5\/32 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17002950 is a single-end square end mill designed for high-precision milling of aluminum and non-ferrous materials. Built from micrograin solid carbide, this tool delivers rigidity and edge retention in applications where surface finish and dimensional accuracy matter. The 45-degree helix angle promotes efficient chip evacuation and reduces built-up edge when cutting soft metals. At 5\/32 inch (0.1562 inch) in diameter with a 5\/16 inch (0.3125 inch) length of cut, this is a short-series tool suited for slotting, profiling, and peripheral milling in tight geometries. It is installed and used by machinists and CNC tooling technicians in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThis end mill is sized for light-duty milling passes in aluminum alloys, brass, copper, and other non-ferrous materials. The 3\/16 inch straight shank fits standard collet chucks and end mill holders used on CNC machining centers and manual mills. The 2-inch overall length keeps deflection low for this diameter range. The centercutting geometry allows plunge entry as well as conventional and climb milling. Series A245 designates this as a SECO short-series fractional-inch carbide end mill in the uncoated bright finish family.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide construction for edge retention and rigidity at small diameters\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle promotes chip flow and reduces heat buildup in non-ferrous materials\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry enables direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003eUncoated bright finish optimized for aluminum and non-ferrous workpiece materials\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute, single-end configuration\u003c\/li\u003e\n\u003cli\u003eMill diameter tolerance of +0.0000 to -0.0020 inch for consistent fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard collet chucks and end mill holders accepting a 3\/16 inch straight shank. Primary workpiece material designation is aluminum and non-ferrous (material code N). Part of the SECO Series A245 short-series fractional-inch solid carbide end mill line.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or CNC tooling technician should install this tool using a calibrated collet chuck or end mill holder torqued per the toolholder manufacturer's specifications. Confirm runout does not exceed the listed TIR maximum of 0.0005 inch before beginning a cut. Always power down and lock out the spindle before changing tooling. Do not use this uncoated tool on ferrous materials, as it is not designed for that application.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/32 inch (0.1562 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/16 inch (0.3125 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0020 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 to -0.0004 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A245\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17002950\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557996429618,"sku":"17002950","price":46.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ff13367177960266139f121457a41b37_39df4ed5-4cad-4881-9b3e-76ce6181fb8e.jpg?v=1786400421","url":"https:\/\/voomisupply.com\/products\/seco-17002950-square-end-mill-5-32-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}