{"product_id":"seco-17002207-corner-radius-end-mill-0-5in-3-flute-ticn","title":"Seco 17002207 Corner Radius End Mill 0.5in 3 Flute Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 17002207 is a solid carbide corner radius end mill designed for precision milling of non-ferrous metals. It carries a 0.5-inch mill diameter, a 0.625-inch length of cut, and a 0.0200-inch corner radius, making it well suited for both roughing and finishing passes where edge integrity and tight tolerances are required. The TiCN (titanium carbonitride) PVD coating extends tool life and reduces built-up edge when cutting aluminum, brass, copper, and similar materials. With a 40-degree high helix angle and three right-hand spiral flutes, the tool promotes efficient chip evacuation and smooth surface finishes in high-feed applications. It is installed by machinists and CNC programmers in toolholders as part of standard milling setups.\u003c\/p\u003e\u003cp\u003eThis end mill is sized for use in vertical and horizontal machining centers as well as CNC knee mills where a straight-cylindrical 0.5-inch shank is accommodated. The Series AN340 designation places it in a short-length, extended-reach geometry with a 2.125-inch reach length and a 0.480-inch neck diameter, giving clearance in pocketing and contouring operations without sacrificing rigidity. It is primarily applied to non-ferrous metal workpieces (material code N) in production and job-shop environments. The single-end, centercutting design allows plunge entry and full-slot milling without a pre-drilled pilot hole.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0200-inch corner radius with tolerance of plus or minus 0.00100 inch for consistent edge geometry\u003c\/li\u003e\n\u003cli\u003eTiCN PVD coating provides wear resistance and reduced adhesion on non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e40-degree high helix, right-hand spiral flutes support roughing and finishing in a single tool\u003c\/li\u003e\n\u003cli\u003eExtended-reach geometry with 2.125-inch reach and 0.480-inch neck diameter for pocketing clearance\u003c\/li\u003e\n\u003cli\u003eCentercutting single-end design enables direct plunge entry without a pilot hole\u003c\/li\u003e\n\u003cli\u003eCoarse pitch, no chipbreaker — optimized for continuous cuts in ductile non-ferrous alloys\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard toolholders accepting a 0.5-inch straight-cylindrical shank. Primary workpiece material designation is non-ferrous metal (code N), including aluminum, brass, copper, and similar alloys. Part of the SECO AN340 series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool is installed and changed by machinists or CNC setup technicians. Before tool changes, confirm the spindle is fully stopped and the machine is placed in a safe state per the machine tool manufacturer procedures. Secure the shank in the toolholder to the torque specified by the toolholder manufacturer and verify runout against the 0.0005-inch maximum TIR spec before cutting. Do not use this end mill on ferrous or hardened steel workpieces, as the TiCN coating and non-ferrous material designation indicate it is not optimized for those applications.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0200 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.6250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.4800 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 2.1250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum TIR\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0020 \/ 0.0000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.00100 to -0.00100 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: -0.0600 \/ +0.0600 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: AN340\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5 inches x 1 inches x 1 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17002207\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51563946737970,"sku":"17002207","price":200.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f3f71a3d3f0822572a54272ed24ff517_e6fafd90-1776-4a91-a9c1-114f0a086748.jpg?v=1786507525","url":"https:\/\/voomisupply.com\/products\/seco-17002207-corner-radius-end-mill-0-5in-3-flute-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}