{"product_id":"seco-17002086-ball-end-mill-0-5-in-4-flute-solid-carbide-altin","title":"Seco 17002086 Ball End Mill 0.5 in 4 Flute Solid Carbide Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17002086 is a solid carbide ball end mill from the STBN440 series, designed for high-performance material removal in steel, cast iron, and aluminum and non-ferrous alloys. It features a 0.5-inch mill diameter with a 4-flute, right-hand spiral configuration and a 40-degree variable helix angle that promotes chip evacuation and reduces chatter during aggressive cuts. The AlTiN PVD coating improves heat resistance and extends tool life in dry or semi-dry machining conditions. The extended-reach geometry and 2.5-inch neck length make this mill suitable for deep-cavity and contour work where standard-length tools cannot reach. Centercutting capability allows plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003cp\u003eThis ball end mill is built for roughing and finishing operations on steel, cast iron, and aluminum and non-ferrous workpieces. The extended reach and Weldon flat shank make it a practical choice for mold and die work, aerospace component machining, and general CNC profiling where deep slot or pocket access is required. The single-end configuration with a 0.625-inch length of cut and 3.125-inch reach length supports both light finishing passes and moderate material removal rates on a variety of CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN PVD coating improves thermal resistance and extends tool life in dry cutting\u003c\/li\u003e\n  \u003cli\u003e40-degree variable helix angle reduces vibration and improves surface finish\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 2.5-inch neck length and 3.125-inch reach length for deep-cavity access\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank provides secure tool holding and reduces pullout risk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and milling machines with standard 0.5-inch tool holders compatible with a Weldon flat shank. Suitable for primary workpiece materials including steel, cast iron, and aluminum and non-ferrous alloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Secure the Weldon flat shank firmly in a compatible end mill holder before use, ensuring the set screw engages the flat to prevent pullout under load. Confirm spindle speed and feed rate are set per the shop's established parameters for the workpiece material before starting the cut. Do not exceed the tool's rated depth of cut for the material being machined.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.48 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron, Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0600 \/ -0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: STBN440\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Catalog Number\u003c\/strong\u003e: STBN440-0.500-E2-B.3-Z4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.45 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17002086\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51563368677682,"sku":"17002086","price":314.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6b4d3333929c9392db5fa4de5ea4c6ba_600372fd-eae8-4aec-aa41-6965507e1bc0.jpg?v=1786496577","url":"https:\/\/voomisupply.com\/products\/seco-17002086-ball-end-mill-0-5-in-4-flute-solid-carbide-altin","provider":"Voomi Supply","version":"1.0","type":"link"}