{"product_id":"seco-17000922-square-end-mill-0-1181-in-6-flute-altin-carbide","title":"Seco 17000922 Square End Mill 0.1181 in 6 Flute Altin Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 17000922 is a single-end, square-profile solid carbide end mill designed for high-performance milling in demanding materials. Built on the S645M series platform, it features a 6-flute geometry with a 45-degree helix angle and an AlTiN coating, making it well-suited for cutting stainless steel and high-temperature alloys where heat resistance and edge stability are critical. The micrograin carbide substrate supports precise tolerances and resists chipping under aggressive feed conditions. Mill diameter is 0.1181 inches with a matching straight shank diameter of 0.1181 inches and a length of cut of 0.4724 inches. Overall length is approximately 1.535 inches (39 mm). This tool is intended for use by machinists and tooling specialists in CNC milling applications.\u003c\/p\u003e\n\u003cp\u003eThis end mill is classified as a long-length-of-cut tool within the 0.3000 to 0.5000 inch LOC range, giving it additional reach for slot milling, profiling, and pocket work where standard-length tools fall short. Its right-hand cut and right-hand spiral flute configuration is the standard orientation for conventional CNC vertical and horizontal milling centers. The AlTiN coating performs well in dry or minimal-lubrication cutting environments typical of stainless and nickel-based high-temperature alloy operations. Primary workpiece material designations per ISO material group are M (stainless steel) and S (high-temp alloy).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-flute, 45-degree helix spiral geometry for efficient chip evacuation in tough alloys\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides heat and oxidation resistance in dry or near-dry cutting\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for tight tolerances and extended tool life\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capable — suitable for plunge entry operations\u003c\/li\u003e\n  \u003cli\u003eLong LOC classification (0.4724 inches) accommodates deeper slot and pocket work\u003c\/li\u003e\n  \u003cli\u003eMill diameter tolerance of +0.0000 to -0.0020 inches for consistent fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard straight-shank collet systems and CNC milling tool holders accepting a 0.1181 inch (3 mm) shank. Optimized for milling stainless steel (ISO M) and high-temperature alloys (ISO S) as stated by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist familiar with CNC tooling setup and collet torque procedures. Ensure the tool holder and collet are clean and free of debris before seating the shank to the recommended gauge depth. Verify spindle runout against the TIR maximum specification of 0.0005 inches before beginning a cut. Do not exceed recommended cutting parameters for the workpiece material, and confirm compatibility with the machine spindle RPM range before operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.1181 inches (3.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.4724 inches (12.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 39.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1181 inches (3.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Single End, Square\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, High-Temp Alloy (ISO M, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.006 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: +0.0600 to -0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: S645M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 17000922\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558771163442,"sku":"17000922","price":60.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f9194ff3826905d3a202a33ffaca9a5b.jpg?v=1786420105","url":"https:\/\/voomisupply.com\/products\/seco-17000922-square-end-mill-0-1181-in-6-flute-altin-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}