{"product_id":"seco-10023040-corner-radius-end-mill-5-32-in-3-flute-carbide","title":"Seco 10023040 Corner Radius End Mill 5\/32 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 10023040 is a single-end corner radius end mill designed for precision milling of non-ferrous metals. Built from solid carbide, it features a 5\/32-inch (0.1562-inch) mill diameter, a 0.0200-inch corner radius, and three right-hand spiral flutes with a high-angle helix. The tool carries an ANF PVD coating that extends cutting life on aluminum, copper, brass, and similar materials. At 2 inches overall length with a 1\/2-inch length of cut, this end mill suits both roughing and finishing passes in a standard toolholder setup. It is center-cutting, allowing direct plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003cp\u003eThe 10023040 is intended for CNC machining centers and manual mills where tight tolerances and clean surface finishes on non-ferrous workpieces are required. Its 3\/16-inch straight-cylindrical shank fits standard toolholders commonly used in production and job-shop environments. The coarse pitch combined with the high-helix geometry promotes efficient chip evacuation, reducing heat buildup during high-speed passes on aluminum and other gummy materials. This tool is appropriate for machinists, toolroom technicians, and CNC operators working within aerospace, automotive, and general manufacturing applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in non-ferrous milling\u003c\/li\u003e\n  \u003cli\u003eANF PVD coating extends tool life and reduces friction on aluminum and non-ferrous alloys\u003c\/li\u003e\n  \u003cli\u003e0.0200-inch corner radius reduces stress concentration at cutting edges\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eThree right-hand flutes with high-helix geometry for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eHandles both roughing and finishing passes in a single tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard straight-cylindrical toolholders. Optimized for non-ferrous metal workpiece materials including aluminum, brass, and copper. Part of the SECO Series A345R end mill family.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator with the machine powered down and the spindle at a full stop before tool changes. Seat the straight shank fully into the toolholder collet and torque the retention mechanism to the toolholder manufacturer's specification. Verify runout does not exceed the 0.0005-inch TIR maximum before beginning production cuts. Confirm workpiece material compatibility before applying cutting parameters, as this tool is engineered specifically for non-ferrous applications.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/32 inch (0.1562 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.1560 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: High\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ANF (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: -0.0020 \/ 0.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length Tolerance\u003c\/strong\u003e: -0.0600 \/ 0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A345R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.7 x 0.48 x 0.48 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10023040\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558156960050,"sku":"10023040","price":76.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/28fc7ea52cb558d080f17bf18a194594_08643da5-714c-4f7c-8f06-2124f5130cea.jpg?v=1786404799","url":"https:\/\/voomisupply.com\/products\/seco-10023040-corner-radius-end-mill-5-32-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}