{"product_id":"seco-10023006-square-end-mill-3-16-in-3-flute-solid-carbide","title":"Seco 10023006 Square End Mill 3\/16 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 10023006 is a single-end square end mill designed for precision milling in aluminum and non-ferrous materials. Built from micrograin solid carbide, it delivers rigidity and edge retention where high-speed cutting of soft metals demands a stable, sharp tool. The 3\/16 inch cutting diameter pairs with a 9\/16 inch length of cut and a 45-degree helix angle, promoting efficient chip evacuation and reduced built-up edge. An ANF coating further improves surface lubricity for cleaner finishes on aluminum alloys. This tool is installed and operated by machinists and CNC programmers working in job shops, aerospace component work, and general metalworking environments.\u003c\/p\u003e\u003cp\u003eThe 10023006 is suited to finishing and light roughing passes on aluminum, brass, copper, and other non-ferrous stock. The 3-flute geometry balances chip load per tooth with enough core strength to handle the 3\/16 inch diameter without deflection on typical benchtop and VMC setups. The straight, 3\/16 inch shank mounts directly into standard ER collets or end mill holders. With a 2 inch overall length and standard length classification, it fits most short-reach applications without requiring extended-reach holders.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide construction for superior edge retention and rigidity at small diameters\u003c\/li\u003e\n\u003cli\u003e45-degree right-hand helix promotes aggressive chip evacuation in aluminum and non-ferrous alloys\u003c\/li\u003e\n\u003cli\u003eANF coating reduces friction and built-up edge on non-ferrous workpiece materials\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable — allows plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003e3-flute, right-hand spiral design balances chip clearance and feed rate capacity\u003c\/li\u003e\n\u003cli\u003eSingle-end configuration with straight shank for direct collet or end mill holder mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in aluminum and non-ferrous material applications as part of the SECO Series A345 end mill family. The 3\/16 inch straight shank is compatible with standard ER collet systems and end mill holders sized for 3\/16 inch shank diameters.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with CNC or manual milling equipment. Ensure the spindle is fully de-energized and locked out before mounting or removing tooling. Use a calibrated collet or end mill holder torqued to the machine manufacturer's specification — do not overtighten or use worn collets, as runout directly affects tool life at this diameter. Verify TIR before beginning a production run; the maximum rated TIR for this tool is 0.005 inches.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 9\/16 inch (0.5625 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide — Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ANF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Aluminum and Non-Ferrous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: 0.0020 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum TIR\u003c\/strong\u003e: 0.0050 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: A345\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.7 inches x 0.48 inches x 0.48 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10023006\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557933252914,"sku":"10023006","price":75.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c65a1ca876a175f8f0f8f691de4cb010_8b266124-c482-4bc6-b509-2deed0465afc.jpg?v=1786398779","url":"https:\/\/voomisupply.com\/products\/seco-10023006-square-end-mill-3-16-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}