{"product_id":"seco-03272916-milling-insert-mp2501-solid-carbide","title":"Seco 03272916 Milling Insert MP2501 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 03272916 is a solid carbide trigon milling insert in the XNEX-08 series, manufactured to grade MP2501 with a CVD-applied Duratomic TiCN and Al2O3 multilayer coating. The insert follows an XNEX style with a double-sided, right-hand configuration and a negative rake geometry with a 17-degree rake angle and a T-Land cutting edge style featuring the MD15 chip breaker. Six cutting edges are available per insert. With a maximum depth of cut of 0.2953 inches and a corner radius of 0.0315 inches, this insert is designed for productive milling passes on steel and stainless steel as its primary workpiece materials. It is sized to the 080608 insert size code with an inscribed circle of 0.4913 inches and a thickness of 0.2539 inches.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for use in milling operations on steel, stainless steel, cast iron, superalloys, and titanium in both production and maintenance machining environments. It is held in the cutter body by screw-type clamping and is compatible with the R217.96-08 and R220.96-08 cutter series as specified by the manufacturer. Typical applications include face milling, shoulder milling, and general-purpose material removal where consistent edge life and thermal wear resistance are required. The CVD Duratomic coating process provides a hard, smooth surface layer suited to high-speed cutting conditions on ferrous and exotic workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide fine-grain substrate with CVD-applied Duratomic TiCN and Al2O3 multilayer coating for extended tool life\u003c\/li\u003e\n  \u003cli\u003eDouble-sided insert with 6 usable cutting edges, maximizing cost efficiency per insert\u003c\/li\u003e\n  \u003cli\u003eNegative rake geometry with 17-degree rake angle and MD15 chip breaker for controlled chip formation\u003c\/li\u003e\n  \u003cli\u003eT-Land cutting edge style suited to interrupted cuts and harder workpiece materials\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 0.2953 inches and corner radius of 0.0315 inches for precise finish and material removal control\u003c\/li\u003e\n  \u003cli\u003eScrew-type insert holding for secure seating and repeatable positioning in compatible cutter bodies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with the R217.96-08 and R220.96-08 cutter series as stated by the manufacturer. ANSI and ISO code XNEX080608TR-MD15. Fits XNEX-08 series toolholders designed for 080608 insert geometry.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or tooling technicians. Ensure the spindle is fully stopped and the machine is locked out before changing inserts. Use the appropriate torx or hex key to seat the clamping screw to the cutter body specification. Inspect the pocket seating surface for chips or debris before loading a new insert to ensure proper seating and avoid edge chipping on first contact.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: MP2501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: XNEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Trigon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 080608\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: XNEX-08\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide, Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN and Al2O3 (Duratomic, CVD Process)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSided\u003c\/strong\u003e: Double Sided\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 17 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: T-Land\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: MD15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0.00 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 88.28 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.4913 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.2539 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 0.2953 inches (19\/64 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1811 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.2953 inches (3.75 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Effective Length\u003c\/strong\u003e: 0.2953 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Cast Iron, Superalloys and Titanium (M, K, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI\/ISO Code\u003c\/strong\u003e: XNEX080608TR-MD15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 0.47 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 1.97 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 4.33 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 03272916\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557300994354,"sku":"03272916","price":59.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/53d2b5058884412d53ae4ec811866f7e.jpg?v=1786385412","url":"https:\/\/voomisupply.com\/products\/seco-03272916-milling-insert-mp2501-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}