{"product_id":"seco-03067318-corner-radius-end-mill-head-4-flute-2mm","title":"Seco 03067318 Corner Radius End Mill Head 4 Flute 2mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 03067318 is a single-end corner radius end mill head designed for precision milling operations in metalworking and machining applications. Built from solid carbide with a micrograin material grade, it delivers high wear resistance and consistent edge retention under demanding cutting conditions. The tool features an HXT coating for improved thermal protection and extended tool life. With a 2.00 mm mill diameter and a 10-degree helix angle, this head is engineered for right-hand spiral cutting. The 4-flute configuration supports smooth chip evacuation and improved surface finish in finishing and semi-finishing passes. Licensed machinists and CNC operators in job shop and production environments are the primary users of this tooling.\u003c\/p\u003e\n\u003cp\u003eThis end mill head is suited for small-diameter milling work where tight tolerances and controlled depth of cut are required. The extended reach design, with a 10.00 mm reach length and a reduced 1.80 mm neck diameter, allows access to recessed features and stepped pockets. A 6.00 mm cylindrical shank provides secure clamping in collet or hydraulic tool holders. The 0.50 mm length of cut makes this head appropriate for finishing passes on hardened or abrasive materials where minimal engagement is preferred. It is part of the JHF181 series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide micrograin construction for high edge hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eHXT coating for thermal protection and extended tool life in abrasive materials\u003c\/li\u003e\n  \u003cli\u003e4-flute right-hand spiral geometry supports smooth chip flow and surface quality\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 1.80 mm neck diameter for access to deep or recessed features\u003c\/li\u003e\n  \u003cli\u003e6.00 mm cylindrical shank compatible with standard collet and hydraulic holders\u003c\/li\u003e\n  \u003cli\u003eSingle-end design; not centercutting — plunge entry not recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with tool holders accepting a 6.00 mm cylindrical shank. Part of the SECO JHF181 series of corner radius end mill heads. Confirm holder bore diameter and clamping reach before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before seating the shank. Verify runout after clamping using a dial indicator — excessive runout will accelerate edge wear and reduce dimensional accuracy. This tool is not centercutting; do not use for direct plunge entry into solid material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: HXT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.50 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 50.00 mm (approximately 1.97 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 10.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 1.80 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 10 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: JHF181\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.17 inches (L) x 0.51 inches (W) x 0.51 inches (H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 03067318\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558605160754,"sku":"03067318","price":189.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ff0a69b8c3f39df8231633c44a8eb105.jpg?v=1786415579","url":"https:\/\/voomisupply.com\/products\/seco-03067318-corner-radius-end-mill-head-4-flute-2mm","provider":"Voomi Supply","version":"1.0","type":"link"}