{"product_id":"seco-03046341-solid-carbide-jobber-drill-19-64-in-tialn","title":"Seco 03046341 Solid Carbide Jobber Drill 19\/64 in Tialn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 03046341 is a solid carbide jobber-length drill bit from the SD205A series, designed for high-performance drilling in demanding metal-cutting applications. Built with a TiAlN (titanium aluminum nitride) coating, it handles elevated cutting temperatures and extends tool life in ferrous and hard materials. The 140-degree point angle promotes fast penetration and self-centering without a pilot hole. At 4.0551 inches overall length with a 2.4016-inch flute length, it delivers a 6xD depth-to-diameter ratio suitable for through-hole and blind-hole work. Licensed HVAC techs, machinists, and maintenance professionals working in steel, stainless steel, cast iron, and other hard materials will find this bit suited to production and repair drilling alike.\u003c\/p\u003e\u003cp\u003eThis drill bit targets metalworking applications where tool life and dimensional accuracy are critical. It is suited for use in CNC machining centers, drill presses, and handheld power tools capable of accepting a 10 mm (0.3937 inch) straight-cylindrical shank. Primary workpiece materials include steel, stainless steel, cast iron, and hard materials classified under material codes P, M, K, and H. The right-hand spiral flute design and regular spiral type make it a standard fit for conventional drilling setups. No coolant-through capability is required, keeping setup simple for general shop use.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eTiAlN coating reduces heat buildup and improves tool life at higher surface speeds\u003c\/li\u003e\n\u003cli\u003e140-degree standard point angle for fast penetration and accurate self-starting entry\u003c\/li\u003e\n\u003cli\u003eRegular right-hand spiral flute with 6xD depth ratio for consistent chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank at 10 mm diameter fits standard drill chucks without adapters\u003c\/li\u003e\n\u003cli\u003eMeets ANSI standards with m7 diameter tolerance for close-tolerance hole applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThe 03046341 is designed for drilling steel, stainless steel, cast iron, and hard materials (material codes P, M, K, H) and belongs to the SECO SD205A series of solid carbide jobber drills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall in a machine tool or drill press with a chuck rated for the 10 mm straight-cylindrical shank diameter. Secure the shank to the full grip depth of the chuck before operation. Confirm spindle speed and feed rate match the workpiece material and bit diameter per the tool manufacturer cutting data before starting. Inspect the cutting edges for chipping or wear before each use, as solid carbide is brittle and susceptible to damage from improper handling or interrupted cuts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 19\/64 inch (0.3437 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.0551 inches (103 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.4016 inches (61 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 2.4016 inches (49 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3937 inch (10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.5748 inches (40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth-to-Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: m7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SD205A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 6.3 x 0.98 x 0.98 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 03046341\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559093502258,"sku":"03046341","price":295.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e55815a1bfb85a3782f51f2020572cfc_5ebf8a83-7312-46a2-a740-f3445de60c8f.jpg?v=1786427317","url":"https:\/\/voomisupply.com\/products\/seco-03046341-solid-carbide-jobber-drill-19-64-in-tialn","provider":"Voomi Supply","version":"1.0","type":"link"}