{"product_id":"seco-03046226-solid-carbide-jobber-drill-10-50-mm-tialn","title":"Seco 03046226 Solid Carbide Jobber Drill 10.50 Mm Tialn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 03046226 is a solid carbide jobber-length drill bit engineered for high-performance drilling in demanding materials. It features a TiAlN coating that extends tool life by resisting heat and wear at elevated cutting speeds. The 140-degree point angle reduces thrust and improves centering on entry, making it well suited for harder workpiece materials. With an overall length of 118.00 mm (4.6492 inches) and a flute length of 71.00 mm (2.7974 inches), this two-flute, right-hand spiral drill is designed for consistent, accurate hole production in production and job-shop environments. It carries an ANSI specification designation and is part of the SD205A series.\u003c\/p\u003e\u003cp\u003eThis drill is rated for use in steel, stainless steel, cast iron, and other hard materials, corresponding to material codes P, M, K, and H. It is suited for CNC machining centers and drill presses where tight tolerances and repeatable hole quality are required. The straight-cylindrical shank with a 12.00 mm (0.4728-inch) diameter fits standard toolholders and collet chucks. The 6xD flute-to-diameter ratio supports deeper drilling passes relative to the bit diameter, reducing the need for peck cycles on moderate-depth holes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eTiAlN coating reduces thermal wear and extends cutting life at high surface speeds\u003c\/li\u003e\n\u003cli\u003e140-degree standard point angle improves self-centering and lowers entry thrust\u003c\/li\u003e\n\u003cli\u003eRight-hand, regular spiral flute geometry promotes efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank compatible with standard collet chucks and toolholders\u003c\/li\u003e\n\u003cli\u003eANSI-standard specification, m7 diameter tolerance for consistent fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and drill presses accepting a 12.00 mm straight-cylindrical shank. Suitable for drilling steel, stainless steel, cast iron, and hard materials per material group codes P, M, K, and H. Part of the SECO SD205A series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and operation should be performed by a qualified machinist or tooling technician familiar with cutting tool setup. Before mounting, verify the toolholder or collet is clean, undamaged, and properly sized for a 12.00 mm shank. Secure the shank to the recommended clamping depth and confirm runout is within acceptable limits before beginning a cut. Do not exceed the recommended maximum drilling depth of 56.00 mm (2.7974 inches) without reconsidering cycle parameters.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 10.50 mm (0.4137 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 118.00 mm (4.6492 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 71.00 mm (2.7974 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 12.00 mm (0.4728 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 45.00 mm (1.7730 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 56.00 mm (2.7974 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: m7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Margin\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flats\u003c\/strong\u003e: 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 6xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SD205A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.309 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 03046226\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560831385906,"sku":"03046226","price":403.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e55815a1bfb85a3782f51f2020572cfc_19e695b7-0c4f-4343-8b1c-2696e73a2ab1.jpg?v=1786458392","url":"https:\/\/voomisupply.com\/products\/seco-03046226-solid-carbide-jobber-drill-10-50-mm-tialn","provider":"Voomi Supply","version":"1.0","type":"link"}