{"product_id":"seco-02960746-turning-insert-dnmg432-mf5-tp2501-carbide","title":"Seco 02960746 Turning Insert DNMG432-MF5 TP2501 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02960746 is a DNMG432-MF5 indexable turning insert in grade TP2501, designed for general-purpose external and internal turning operations on CNC lathes and turning centers. The insert is manufactured from solid carbide and finished with a CVD-applied Duratomic multilayer coating of TiCN, Al2O3, and Cr, which improves wear resistance and thermal stability during continuous and interrupted cuts. The 55-degree diamond shape (Insert Shape Code D) provides four usable cutting edges per insert. An inscribed circle of 0.5 inches and a corner radius of 0.0315 inches (1\/32 inch) suit a wide range of moderate-depth finishing and semi-finishing passes.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for machining steel, stainless steel, and cast iron, corresponding to ISO material groups P, M, and K. Typical applications include facing, turning, back turning, and boring on production and job-shop lathes. The MF5 chip breaker geometry is optimized for light to medium depths of cut, with a maximum depth of cut of 0.1063 inches. Material grades P10, P20, P30, and P35 indicate suitability across a spectrum of steel alloys from low-carbon to alloy steels. The Neutral hand orientation allows use in standard right-hand toolholders without restriction.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCVD Duratomic multilayer coating (TiCN, Al2O3, Cr) for extended tool life in steel and stainless applications\u003c\/li\u003e\n  \u003cli\u003eMF5 chip breaker geometry with chamfered and honed cutting edge for controlled chip formation at light to medium feeds\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges per insert reduce per-edge tooling cost\u003c\/li\u003e\n  \u003cli\u003eNegative rake, 0-degree relief angle (Clearance Code N) for maximum edge strength\u003c\/li\u003e\n  \u003cli\u003eCompatible with clamp, pin, and lever-lock insert holding methods\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI and ISO standards; ISO code DNMG150408-MF5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in DNMG-style toolholders that accept a 55-degree diamond insert with a 0.2028-inch hole diameter and clamp, pin, or lever-lock retention. Verify toolholder seat and clamping system specifications before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before indexing or replacing inserts. Use the correct torque driver or clamp screw specified by the toolholder manufacturer when securing the insert — do not overtighten. Inspect the insert seat and shim for wear or debris before seating a new insert, as contamination in the pocket will affect runout and edge life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: DNMG-MF5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: DNMG432-MF5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DNMG150408-MF5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TP2501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: CVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: Duratomic (TiCN, Al2O3, Cr)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: MF5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1874 inches (3\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 1.2204 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2028 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.1063 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp, Pin, Lever Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Stainless Steel (ISO M), Cast Iron (ISO K)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: P10, P20, P30, P35\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Applications\u003c\/strong\u003e: Back Turning, Boring, Facing, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 per package (minimum order quantity: 10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02960746\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560294809906,"sku":"02960746","price":319.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/28a5586db289948784d32d3b2ca14015_b5739fa5-e3f3-4c93-adf6-86e51659c94c.jpg?v=1786450257","url":"https:\/\/voomisupply.com\/products\/seco-02960746-turning-insert-dnmg432-mf5-tp2501-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}