{"product_id":"seco-02959992-turning-insert-cnmg433w-m3-tp1501-carbide","title":"Seco 02959992 Turning Insert CNMG433W-M3 TP1501 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02959992 is a CNMG433W-M3 series indexable turning insert manufactured from solid carbide and finished with a CVD-applied Duratomic multilayer coating of TiCN, Al2O3, and Cr. Carrying manufacturer grade TP1501, this negative-rake, neutral-hand insert features an 80-degree diamond shape, a 0.5 inch inscribed circle, and a 3\/64 inch (0.0472 inch) corner radius. The M3 chip breaker geometry uses a chamfered and honed cutting edge style suited for consistent chip control across varying depths of cut up to 0.4606 inches. Four usable cutting edges are provided per insert.\u003c\/p\u003e\n\u003cp\u003eThis insert is designed for steel as the primary workpiece material, with cast iron and hard materials as secondary applications. It is rated to material grades P10 and P20 per ISO classification. Typical operations include turning, facing, and boring on CNC lathes and turning centers in production and job-shop environments. The CNMG433W-M3 geometry with wiper edge capability allows for improved surface finish at higher feed rates. It is installed and indexed by licensed machinists and CNC operators and conforms to both ANSI and ISO insert standards.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCVD Duratomic multilayer coating: TiCN, Al2O3, and Cr for thermal resistance and wear life on steel\u003c\/li\u003e\n  \u003cli\u003eM3 chip breaker with chamfered and honed edge for controlled chip formation\u003c\/li\u003e\n  \u003cli\u003eWiper edge geometry for improved surface finish at standard production feed rates\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges per insert for maximum cost-per-edge value\u003c\/li\u003e\n  \u003cli\u003eCompatible with clamp, pin, and lever lock insert holding methods\u003c\/li\u003e\n  \u003cli\u003eNegative rake, neutral hand — fits standard CNMG toolholders without handedness restrictions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use insert for CNMG-style toolholders accepting clamp, pin, or lever lock retention. ISO code CNMG120412W-M3; industry standard number CNMG433W-M3. Suitable for toolholders conforming to ANSI and ISO CNMG insert seating standards.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert indexing and replacement should be performed by a qualified machinist with the machine in a locked-out, zero-energy state. Seat the insert fully against all toolholder contact surfaces before tightening the clamping mechanism to avoid micro-movement during cutting. Inspect the insert pocket for chips or debris before seating a new edge. Follow the toolholder manufacturer torque and clamping specifications for the specific lever lock, clamp, or pin system in use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CNMG-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: CNMG433W-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: CNMG120412W-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TP1501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: CVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: Duratomic (TiCN, Al2O3, Cr)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape Code\u003c\/strong\u003e: C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 3\/16 inch (0.1874 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 3\/64 inch (0.0472 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2028 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4606 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp, Pin, Lever Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (Code P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron (Code K), Hard Material (Code H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: P10, P20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Application\u003c\/strong\u003e: Boring, Facing, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02959992\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559811678514,"sku":"02959992","price":38.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/830d1a60058b85152bb9642d1c361a8b_5581bb45-cf42-4725-9085-1f3a750b53f7.jpg?v=1786441733","url":"https:\/\/voomisupply.com\/products\/seco-02959992-turning-insert-cnmg433w-m3-tp1501-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}