{"product_id":"seco-02959989-turning-insert-cnmg432w-m3-tp1501-carbide","title":"Seco 02959989 Turning Insert CNMG432W-M3 TP1501 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02959989 is a CNMG432W-M3 series turning insert manufactured from solid carbide with a CVD-applied Duratomic multilayer coating of TiCN, Al2O3, and Cr. It features an 80-degree diamond shape, neutral hand orientation, and a chamfered and honed cutting edge style with an M3 chip breaker. The insert has a 0.5-inch inscribed circle, a 0.0315-inch corner radius, and delivers four usable cutting edges per insert. It is designed for general turning, facing, and boring operations where consistent chip control and extended tool life in steel applications are required. Licensed machinists and CNC setup technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for light to medium roughing and semi-finishing passes on steel, cast iron, and hard materials. The M3 chip breaker geometry manages chip formation across a range of depths of cut up to 0.4764 inches. It is appropriate for both horizontal and vertical turning centers in production and job-shop environments. Its negative rake geometry and wiper edge make it well-suited for facing passes that require a consistent surface finish. The multi-use design supports boring, facing, and turning in a single insert grade.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCVD Duratomic coating (TiCN, Al2O3, Cr) for wear resistance on steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eM3 chip breaker geometry supports controlled chip formation at varied feed rates\u003c\/li\u003e\n  \u003cli\u003eWiper edge geometry improves surface finish on facing passes\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges per insert for extended tool life per piece\u003c\/li\u003e\n  \u003cli\u003eCompatible with clamp, pin, and lever-lock insert holding methods\u003c\/li\u003e\n  \u003cli\u003eNegative rake, 80-degree diamond shape suits stable, rigid setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNMG-style toolholders that accept a 1\/2-inch inscribed circle, 3\/16-inch thick, 80-degree diamond insert with a 0.2028-inch hole diameter. Compatible with clamp, pin, and lever-lock holding systems conforming to ANSI and ISO CNMG120408 standards. Primary workpiece material is steel (ISO P); secondary applications include cast iron (ISO K) and hard materials (ISO H).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert seating and clamping should be performed by a qualified machinist or CNC technician following the toolholder manufacturer's torque and clamping procedures. Ensure the toolholder pocket and seating surface are clean and free of debris before installing the insert. Power down and lock out the machine spindle before changing inserts. Do not use damaged or chipped inserts, as this can cause unpredictable tool failure during operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CNMG-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: CNMG432W-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: CNMG120408W-M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TP1501\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN, Al2O3, Cr (Duratomic CVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond 80 (Code C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: M3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1874 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2028 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4764 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp, Pin, Lever Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO P10, P20)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron, Hard Material (ISO K, H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Application\u003c\/strong\u003e: Boring, Facing, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02959989\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560960885042,"sku":"02959989","price":291.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/830d1a60058b85152bb9642d1c361a8b_38188695-86c3-4405-9520-aed6a8e3b693.jpg?v=1786460064","url":"https:\/\/voomisupply.com\/products\/seco-02959989-turning-insert-cnmg432w-m3-tp1501-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}