{"product_id":"seco-02685799-indexable-face-mill-6-3-in-10-insert-r220-48","title":"Seco 02685799 Indexable Face Mill 6.3 in 10 Insert R220.48","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 02685799 is an indexable chamfer angle face mill designed for high-productivity facing operations on milling machines. Built to the R220.48 series standard, it accepts 10 ON.U 09 inserts held in place by a wedge clamping method. The cutter runs in a right-hand cutting direction with a negative rake angle of -8 degrees, producing clean, flat surfaces across a range of ferrous and non-ferrous workpiece materials. With a minimum cutting diameter of 6.3 inches and a maximum cutting diameter of 6.89 inches, this shell mill is suited for wide-face passes in both production and job-shop environments. Maximum depth of cut is 0.236 inches. The unit weighs 9.7 pounds.\u003c\/p\u003e\u003cp\u003eThis face mill is intended for CNC machining centers and manual horizontal or vertical knee mills equipped with an arbor or shell mill adapter with a 2-inch arbor hole. The 40-degree chamfer angle geometry makes it well-suited for facing steel, cast iron, and similar materials where a consistent surface finish across a broad cutting path is required. With a maximum rated spindle speed of 3,100 RPM and a normal pitch insert layout across 10 flutes, it supports stable, even chip load distribution in typical production facing cycles. Coolant-through capability is not supported on this cutter body.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eR220.48 series cutter body compatible with ON.U 09 insert size\u003c\/li\u003e\n\u003cli\u003eWedge insert holding method for secure clamping under interrupted and continuous cuts\u003c\/li\u003e\n\u003cli\u003e10-flute, normal pitch layout distributes chip load evenly across the face\u003c\/li\u003e\n\u003cli\u003eNegative rake angle of -8 degrees supports stable cutting in harder materials\u003c\/li\u003e\n\u003cli\u003eMaximum rated speed of 3,100 RPM suitable for standard machining center applications\u003c\/li\u003e\n\u003cli\u003eNo coolant-through channels simplifies setup on standard arbor adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with ON.U 09 series inserts and compatible with arbor or shell mill adapters with a 2-inch bore. This cutter belongs to the SECO R220.48 series platform.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the spindle and machine are fully powered down and locked out before mounting or removing the cutter body from the arbor adapter. Verify arbor bore fit, keyway alignment to the 0.76-inch keyway width, and draw bolt torque per the machine tool manufacturer specifications before running. Never exceed the maximum rated spindle speed of 3,100 RPM.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Cutting Diameter\u003c\/strong\u003e: 6.3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Diameter\u003c\/strong\u003e: 6.89 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.236 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inserts\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Insert Size Code\u003c\/strong\u003e: ON.U 09\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Series\u003c\/strong\u003e: R220.48\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Type\u003c\/strong\u003e: Normal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 3,100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Diameter\u003c\/strong\u003e: 4.331 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyway Width\u003c\/strong\u003e: 0.76 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 2.48 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Body Diameter\u003c\/strong\u003e: 6.87 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Facing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 9.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02685799\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560547025202,"sku":"02685799","price":2873.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eccdb10ff31e0cf837d57f0f94661a85_aec2b894-9e63-4412-a457-1a7480f245a9.jpg?v=1786453631","url":"https:\/\/voomisupply.com\/products\/seco-02685799-indexable-face-mill-6-3-in-10-insert-r220-48","provider":"Voomi Supply","version":"1.0","type":"link"}