{"product_id":"seco-02623040-turning-insert-tgp25-solid-carbide","title":"Seco 02623040 Turning Insert TGP25 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02623040 is a solid carbide multi-directional turning insert in grade TGP25, designed for precision grooving and turning operations on CNC and manual lathes. It carries an LCMF insert style with a Duratomic TiCN\/Al2O3 coating applied through a physical vapor deposition process, improving wear resistance and thermal stability. The insert features a 0.197 inch maximum cutting width, a 0.177 inch cutting height, and a 0.016 inch corner radius with no full radius geometry. A neutral hand orientation and double-end configuration make it adaptable across a range of toolholders and setups. Licensed machinists and CNC operators install and index this insert as part of routine tooling maintenance in production environments.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for use in multi-directional turning and grooving applications on cast iron, stainless steel, and carbon steel workpieces, corresponding to ISO material codes K, M, and P. The MDT series designation and LCMF160504-0500-MT style make it appropriate for moderate to high-volume production turning where consistent chip control is required. The MT chipbreaker geometry supports controlled chip evacuation across these material groups. It is commonly installed in manufacturing shops, job shops, and production facilities running ferrous and stainless alloy components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction in material grade C5 for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eDuratomic TiCN\/Al2O3 coating process for extended tool life on ferrous and stainless materials\u003c\/li\u003e\n  \u003cli\u003e0.197 inch maximum cutting width and 0.177 inch cutting height for precise groove geometry\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation supports use in both left- and right-hand toolholder setups\u003c\/li\u003e\n  \u003cli\u003eDouble-end insert design provides two usable cutting edges per insert\u003c\/li\u003e\n  \u003cli\u003eMT chipbreaker controls chip formation on cast iron, stainless steel, and steel workpieces\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle reduces cutting force and minimizes rubbing on the workpiece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe SECO 02623040 is designed for use in LCMF-style toolholders within the MDT multi-directional turning series. It is rated for primary workpiece materials including cast iron (K), stainless steel (M), and steel (P) as specified by the manufacturer. Verify toolholder pocket geometry and insert seat dimensions against the LCMF160504-0500-MT style designation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eIndexing and replacement of carbide turning inserts is performed by qualified machinists or CNC tooling technicians. Ensure the machine spindle is fully stopped and the toolholder is secured before removing or seating the insert. Use the appropriate torx or clamp screw driver as specified by the toolholder manufacturer to achieve correct clamping force without overtightening. Inspect the insert pocket seat for chips or debris before seating the new insert to prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: LCMF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 160504\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TGP25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Duratomic TiCN\/Al2O3 Coated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Width\u003c\/strong\u003e: 0.197 inches (5.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 0.177 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.630 inches (15.90 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.016 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: MT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: MDT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: LCMF160504-0500-MT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Cast Iron, Stainless Steel, Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius Insert\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02623040\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559496679730,"sku":"02623040","price":570.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/88377f77ffd8d75d7b42634ba98d6dcd.jpg?v=1786433876","url":"https:\/\/voomisupply.com\/products\/seco-02623040-turning-insert-tgp25-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}