{"product_id":"seco-02615933-vnmg-331-mf4-turning-insert-ts2000-carbide","title":"Seco 02615933 Vnmg 331-MF4 Turning Insert TS2000 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02615933 is a VNMG 331-MF4 series turning insert manufactured from solid carbide and coated with a multilayer TiAlN and TiN PVD coating under the TS2000 grade designation. The insert features a 35-degree diamond shape with a negative rake geometry, a 3\/8-inch inscribed circle, and a 1\/64-inch corner radius. It carries four cutting edges and uses an MF4 chip breaker profile designed for medium-finish turning operations. Machinists and CNC turning specialists install this insert into compatible toolholders for precision work on stainless steel, superalloys, and titanium. The chamfered and honed cutting edge style supports controlled chip formation and edge stability under demanding cutting conditions.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for medium-finish and semi-finish turning applications in both production shop and job shop environments. Primary workpiece materials are stainless steel, superalloys, and titanium, with secondary suitability for steel, cast iron, and hard materials. Typical operations include back turning, facing, profiling, and general OD turning. The neutral hand orientation allows use in both right-hand and left-hand toolholder configurations. The insert is compatible with pin, clamp, and lever-lock holding methods, giving it broad flexibility across common VNMG-style toolholder systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTS2000 grade with multilayer TiAlN and TiN PVD coating for wear resistance on stainless and titanium\u003c\/li\u003e\n  \u003cli\u003eMF4 chip breaker geometry optimized for medium-finish turning with positive chip control\u003c\/li\u003e\n  \u003cli\u003eFour usable cutting edges per insert reduces per-edge tooling cost\u003c\/li\u003e\n  \u003cli\u003eChamfered and honed cutting edge style improves edge toughness and surface finish\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation fits both right-hand and left-hand toolholder setups\u003c\/li\u003e\n  \u003cli\u003eCompatible with pin, clamp, and lever-lock insert retention methods\u003c\/li\u003e\n  \u003cli\u003eMeets ANSI and ISO standards; ISO code VNMG160404-MF4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in VNMG-style toolholders that accept a 35-degree diamond insert with a 3\/8-inch inscribed circle, 3\/16-inch insert thickness, and 0.15-inch hole diameter. Compatible with pin, clamp, and lever-lock holding methods. Suitable for back turning, facing, profiling, and turning operations on stainless steel, superalloys, titanium, steel, cast iron, and hard materials per ISO material codes M, S, P, K, and H.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC tooling technician. Power down and lock out the machine spindle before seating or replacing inserts. Use the correct torque driver or clamp screw specified by the toolholder manufacturer to secure the insert — do not overtighten, as this can fracture the carbide substrate. Inspect the insert pocket and seating surfaces for chips or debris before installing a new edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: VNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VNMG-MF4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: TS2000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape Code\u003c\/strong\u003e: V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 35 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/64 inch (0.0157 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 3\/16 inch (0.1874 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 1.3070 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.6142 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN and TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: Multilayer PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: MF4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Chamfered and Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp, Pin, Lever Lock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M05, M10, S10, S15\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-Use Application\u003c\/strong\u003e: Back Turning, Facing, Profiling, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: VNMG160404-MF4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: VNMG331-MF4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 331\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02615933\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558022021426,"sku":"02615933","price":465.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6812564c08682387a2bca59c39976c18.jpg?v=1786401112","url":"https:\/\/voomisupply.com\/products\/seco-02615933-vnmg-331-mf4-turning-insert-ts2000-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}